DIY wire crafts: master classes for beginners. Simple and interesting wire crafts for beginners DIY copper wire crafts

Handicraftsmen make original crafts from everything they can, any available materials are used, and the end result is interesting toys, cute decorations and useful accessories for the home and garden.

Due to its qualities and ease of handling, wire is one of the favorite materials of adults and children. Crafts made from wire are made using one of the following techniques:

1. Filigree. Openwork lace is woven from wire.
2. Ganutel. The wire is combined with decorative threads.
3. Torsion. The pattern is created by twisting the wire.
4. Beading. Compositions with 2D and 3D effects are created, the wire serves as the basis for beads.

The resulting wire products are polished or “aged” to achieve the desired effect.

Material for work

To make a craft with your own hands, you need to use a certain type of wire. Depending on what product you plan to make, choose a material from different types of metal:

1. Chenille, or fluffy wire. Brightness and ease of use have made it a favorite material for kids.
2. Aluminum. Durable, flexible, available in thicknesses up to 12 mm.
3. Copper. Universal material, suitable for all types of crafts. Plastic, unbreakable, but weakly holds its shape. Can be painted or coated with precious metals. Bronze and brass wire have similar qualities.
4. Steel. It bends with difficulty, but holds its shape well.
5. From champagne, made of steel up to 1 mm thick.

There are also types such as floral, cupronickel, jewelry and others.

When choosing wire for crafts, you should consider its parameters:

• cross-sectional diameter can be from 0.2 to 2 mm;
• in cross-section the shape can be round, flat, square, semicircular;
• The pile on chenille has a length of 0.4 to 1.5 cm.

Tools for work

Before you begin the creative process, you need to prepare the following tools:

• nippers/side cutters;
• tongs with smooth and grooved platforms;
• scissors;
• pliers;
• ruler;
• glue (silicone or Moment-crystal).

You can start working!

Fluffy crafts

Chenille wire is a brush for cleaning smoking pipes. But needlewomen could not leave such a wonderful material unnoticed, especially since today manufacturers began to produce chenille wire in various colors and with different pile heights. The pliable fluffy wire is convenient to work with both at home and on the road; even clumsy children’s hands can handle it.

Before you start making crafts from fluffy wire, you need to pay attention to some nuances:

• the ends of the wire pieces are sharp, it is better to immediately bend them into loops;
• elements can be glued together with glue (PVA, silicone) or twisted;
• You can shape it by twisting it onto a pencil.

Craft ideas

Kids can make cute toys with their own hands using fluffy wire.

How to make a bunny from chenille wire:

• cut the wire into 2 pieces of 5 cm and 2 pieces of 10 cm;
• We fold 1 long piece in half - there will be a torso;
• another long piece must be folded in half, each half folded in half again;
• connect the ears to the body;
• from short segments folded in half, legs are obtained; they are secured to the body;
• glue a piece of cotton wool - there will be a tail.

The bunny is ready!

A little imagination - and the house will be filled with mice, spiders, octopuses, butterflies, weirdos and others original crafts. For children, such a pastime is not only exciting, but also useful, as it develops finger dexterity.

You can quickly and easily make puppet theater characters from fluffy wire. How to make Kotofey Ivanovich:

• you will need wire, pompom, eyes, nose, glue;
• a wire 10-15 cm long is wound around a finger to create a torso;
• cut 2 wire pieces 3-4 cm long, fold in half - these are the ears;
• another segment of 5-7 cm - tail;
• ears, tail, fasten or glue, as well as eyes, nose.

From colored wire you can make a variety of crafts needed for the holiday:

• elements of costumes and flashy jewelry;
• New Year's toys for the Christmas tree;
• flower bouquets and topiary;
• decor for gifts.

Copper to work!

From copper wire It’s good to make a variety of jewelry, but before starting complex products, it’s worth practicing making simple models.

To create elegant jewelry, you need copper wire of different diameters: thin is used for braiding, thick is needed for the base.

The wire can be painted in different colors; if you combine them, you get original products.

Herringbone pendant

This pendant can be worn on the eve of holidays, hang on the tree or give as a gift. It's easy to do.

Progress:

1. Take green wire and beads.
2. Bend the wire into a serpentine shape, at the same time putting on the beads and placing them evenly.
3. Make a wire loop at the top and pass the braid for hanging.
4. At the bottom, carefully finish the work with a loop.

In ethnic style, a variety of pendants and earrings are made from soft copper wire with beads, stones, and beads.

Keychains in the shape of keys, butterflies or music notes look interesting. Bookmarks, pencil holders, supplies for a mobile phone and a TV remote will come in handy around the house. All this can be done from multi-colored copper wire, with diligence and imagination.

Volumetric products

Thin and medium-diameter wire is used to create interior 3D sculptures. After studying master classes and practicing, you can make real works of art. But you should start with simple options, for example, a decorative tree, which, according to legend, brings happiness.

You will need:

• wire;
• red and green beads;
• stone for the base.

Progress:

1. Trunk. 5 long strips are woven together, leaving the bottom part unbraided, and dividing the top into branches.
2. A stone is fixed at the bottom.
3. The beads are strung on a small piece of wire, one edge is bent, the other is attached to a branch and fixed by wrapping it several times.
4. The branches are straightened.

Aluminum as art

Aluminum is quite flexible, but at the same time durable, so it is used to make souvenirs and decorations.

Aluminum wire produces:

• candlesticks;
• framework;
• hot coasters;
• napkin holders;
• decorative trees and flowers;
• baskets.

Decorative elements for the home made in 2D format look interesting. To do this, make a life-size sketch, then lay out wire along it. You can connect the parts by wrapping the ends or securing them with loops.

You can make a bracelet, earrings, a pendant - such jewelry not only pleases the eye, but brings satisfaction to the owner who made it with his own hands.

Wire toys for the New Year will be useful in any home:

• star;
• angel;
• snowman;
• bell, etc.

What to make from thick wire

So that the cork in a champagne bottle can withstand high pressure, it is secured with a wire bridle, which is called a muzzle. Thickness – 0.08 cm, length – 52 cm.

Most sites suggest making decorative chairs out of champagne wire. But this does not exhaust the possibilities of this type of material.

Masters create real works of art from it - collectible figurines of people who dance, are sad, and do various things.

However, anyone can make original and unusual crafts from welding wire - all you need is imagination and perseverance.

Hearts

The straightened wire is folded into the shape of a heart. Threads (woolen, half-woolen, textured) are wrapped around the figurine. The resulting crafts are strung on a strong thread - a garland to family holiday ready!

Holders

Name holders will help seat guests at the table. To make them you will need:

• wire;
• several pieces of multi-colored felt or lace;
• champagne corks.

Conventional figures of ballerinas are twisted from wire and dressed up in fabric skirts. The dancers' hands will become holders of place cards with names.

Field for imagination and development

Wire is an excellent material that is easy and pleasant to work with, allowing you to realize the most daring ideas. This activity is also useful for children, because it develops imagination, perseverance, and accuracy.

Probably everyone has tried to make simple wire crafts with their own hands. Remember the improvised rings, bracelets, roses and funny little people that are so easy to twist from copper wire scraps or from thin wire taken from a champagne bottle.

And if you master a few basic elements and get inspired, you can make crafts from copper wire that will become real masterpieces!

Copper wire butterfly

First, you need to learn how to make curls from wire. It is convenient to use special tweezers for this purpose.

Only on the basis of such curls can you make a wonderful version of a wire craft for children - an elegant butterfly with weightless openwork wings.

Twist the second wing using tweezers.

Glue a large bead in the center.

If you stock up on a whole set of tools, you can do much more complex and incredibly interesting crafts. For example, a piece of strong wire can be turned into a dragonfly.

And if you use beads or seed beads in your work, the dragonfly will gain real charm. Crafts made from beads and wire are very popular; they are convenient to use in interior design, creating jewelry and accessories. And making such crafts is not at all difficult - you just need to imagine how you want the end result of your work to look like, and at the right moment string beads onto the wire suitable shape, color and size.

You can use not only small beads, but also fairly large beads. It all depends on the type of product and its size.

Souvenir “Heart” made of copper wire

You can combine wire with other materials. For example, a simple but very cute heart made of copper wire can be fixed on a wooden block.

Twist the wire at the base of the heart.

We lay out the wire a second time. We fix the end of the wire at the bottom of the heart.

We make a hole in a wooden cube, pour a little glue there and insert a wire with a heart there. The result will be a wonderful souvenir, which, by the way, can be conveniently used as a stand for notes, business cards and even photographs.

DIY wire pendants

Instead of beads and beads, you can use buttons and glass pebbles from the hole in the middle. They easily turn into part of an original heart pendant

Or a cute souvenir bird.

A pendant in the shape of a rain cloud will look original.

Copper wire pendant “Tuchka”

You can also turn it into a dream catcher.

You can make a very beautiful feather pendant from colored beads and copper wire.

Or a round elegant medallion pendant.

And this luxurious mandala pendant can be hung on the window so that it delights with the shine of its beads and catches little sunbeams.

Wire pendant "Mandala"

Wire crafts for interior decoration

You can make such pendants part of the decor. For example, a cute octopus will feel very comfortable in your bathroom.

And the bird will be a good decoration for the wall - on the terrace, kitchen, in the corridor. Wherever you want to liven up the interior a little.

Wall pendant “Bird”

You can make a Christmas decoration from wire - an angel in a laconic style.

Pendants on wooden planks look interesting. These can be cute figures of people.

Wire pendant "Men"

An incredibly delicate pendant can be made from dark thin wire for a chandelier.

Or flowers, mugs and hearts.

You can also use pendants on a wooden plank as a mobile toy above your baby’s crib. Wire ballerina Wire chairs Wire cacti

Of course, you can use wire and beads to create elegant jewelry and accessories. In this case, you can do without beads if you take bright wire and give it the desired shape. It’s enough just to make a pendant or a beautiful bracelet out of it.

Wire weaving was especially popular in Soviet times: then people, bracelets, rings, boxes, baskets, key chains, and flowers were made from multi-colored flexible twigs. Today, any decoration and useful thing in everyday life can be bought, but it’s much nicer do it yourself and, for example, give it to your mother. Or surprise your peers with an original bauble made of beads and wire. Beginning needlewomen and needlewomen will find it useful to read an article from the old magazine “Family and School” about how to weave with wire. Here you will find patterns and methods of wire weaving, you will learn interesting ideas for creativity.

Material: pieces of telephone cable with insulation of different colors, and thicker wire, which will be needed for making frames.

Tools: wire cutters, pliers, hammer and awl.

To make templates you will need: cardboard, paper (thick), ruler and compass.

Wire weaving patterns and methods

The first and second pictures show various methods of weaving from two, three or more pieces of wire. Weaving in the form of a braid (Figure 1, I a, b, c, d, e) . Take a piece of wire, bend it, and fasten the second wire to the first at the bend. For convenience, the upper part is secured with a nail to the board and woven as shown in the figure. You can make a rope out of two wires. Having connected two pieces, twist them to the right or to the right. left side. Two “ropes” twisted in different directions and placed together form a Christmas tree.

Wicker “path” (Figure 1, II a, b) . Taking a wire 1.5 mm thick, bend one end of it, and weave it with thinner wires at the bend until the width required for your path is formed. Having completed the first row, the end of the first piece of wire is bent, passing it between the ends of the entire braid, like the movement of a shuttle in a loom, and weaving of the second row begins. Having finished the second row, the end of the first piece is folded again and passed between the ends of the braid, but from the opposite side. In this order, weave the path to the desired size.

Braided round belt (Figure 1, III a, b, c, d, e, f, g, i, j) . The figure shows in sequential order the weaving of a belt from four ends of wire.

When weaving, you need to remember that each row ends by threading the last end into the loop formed by bending the initial one. A new row can be started from any end, but the last one must be threaded into the loop of the first, thus completing the weaving of the row.

The belt is woven from any number of wires. Figure 2 shows the weaving of two belts around a rod (front view and side view). The rod is made up of several wires placed in a row close to each other.

The first end of the wire is threaded behind the rod and forms a loop on the side of the rod, and the second end of this wire, encircling the rod from the front side, is threaded into the resulting loop and wound behind the rod. Then the first end of the wire is encircled around the rod from the front side and threaded into the loop of the second end, and so, doing row after row, you can get a belt of any length.

The second exercise is slightly different from the first; the sequence of its implementation is shown in the figure.

Ideas: what interesting things can be woven from wire

Round wire stand:

On a board of small thickness, nails without heads are driven in a circle at equal distances. Then two pieces of 1.5 mm thick wire are braided around the carnations in opposite directions. The third piece of wire is placed radially between the nails, fastening the outer braid. The center is tied with thin wire. The resulting frame is braided with a fourth, thinner piece of wire. Weaving along the frame begins from the center. Having secured the end of the wire, weaving is done in a circle, alternately bending around radially located threads on one side or the other.

Wire basket:

The frame is assembled from an even number of pieces of wire - 6, 8, 10 or more, depending on the size of the basket. First they bend correct form ring, and then from one piece two risers, a bottom and a handle and fasten them to the ring. Next, the remaining risers and the base for the bottom are bent from four pieces. Having bent the upper ends, hang them on the ring, securing them tightly with pliers.

First of all, weave the bottom. Having secured the end of the wire in the center, they make several weaves in a circle, similar to the weaving of the stand, and then move on to weaving radial threads that form the bottom. The risers of the sides are braided in the same way.

With this method of weaving, gaps remain between horizontally running threads. The base of the handle is braided with thin wire, tightly fitting the spiral rings to each other.

Wire shopping bag:

To work, you will need thick cardboard, the size of the intended bag. On it, use a pencil to mark the points for the holes for attaching the handles and the frame of the bag. Punch holes in the designated places with an awl and begin making two metal or wooden rings for the handles. The finished handles are placed on the cardboard (at the attachment points on both sides) and secured to the cardboard with a thin cord or wire, as shown in the figure.

When making a frame, threads of wire are passed through the holes and thrown onto the rings of the handles. Then one of the methods begins to weave from the bottom up. Once the sides of the bag are ready, the cardboard is removed. Thin wire is used to wrap the handles.

DIY colored wire flowers:

Figure 6 shows how to make flowers from spirals.

The flowers are collected into a bouquet and the “stems” are wrapped with thin wire, the ends are divided into separate bundles (8 - 10), which serve as a frame for weaving the base of the vase. The weaving method is the same as for the sides of the basket (see Figure 4).

Dog and deer:

The body and head of the deer are woven in the form of a round belt (see Figure 1).

The front legs are woven into the body and pass into the neck, made using the spiral winding method. The dog consists of a frame braided with winding.

How to bend and join wire

You can make many different objects from wire - from the simplest hook to the most complex designs. Copper, iron, steel, aluminum wire and telephone cable with coatings of different colors are suitable. The wire is stored wound in circles. Tools required: hammer, small vice, file, pliers, wire cutters, pliers, pliers, round nose pliers, plumber's scissors, soldering iron.

The wire is straightened by pulling it between two wooden blocks or by pulling it tightly around a round metal rod ( door knob). It is better to straighten steel wire or thin rod metal on a hard surface with a hammer or mallet. Small parts are bent with pliers or round nose pliers. Large and hard - bent in a vice.

Iron and copper thin wire is cut with wire cutters and pliers. Steel - at the site of the cut, it is preheated over a fire. Strip or sheet metal is first marked, and then at the marking points it is lightly scored and chopped with strong blows.
Individual pieces of wire and other metal parts are joined by bending or soldering. In the first case, several turns are made, pulling the wire onto the rod. Before soldering, the surface of the parts is thoroughly cleaned with a file or sandpaper to remove dirt and rust. The wire is soldered by putting the two ends together, having first twisted them for strength. Thin wire can be soldered using paste - tinol, which is applied in a thin layer to the soldering site and heated over a fire.

To learn how to make things from wire well and cleanly, you must first make a number of simple details:

• Spiral-spring. A wire 1-1.5 millimeters thick is wound onto a round wooden bolsan of cylindrical or cone shape (Figure 1, a).
• Rings and half rings. The spiral-spring is cut lengthwise (Figure 1, b).
• Flower. Six half rings are soldered to the ring (Figure 1, c).
• Gear. Six half rings are soldered together [Figure 1, d).
• Spiral. Use pliers to grab the end of the wire and twist it in a circle by rotating your hand (Figure 1, e).
• Openwork of three spirals (Figure 1, f).
• Openwork leaf. 4 - 5 rings are made on a cone-shaped blank (wire thickness - 0.5 - 1 millimeter). The resulting rings are given the shape shown in Figure 1g and soldered at the base.
• The trefoil is bent from one wire with pliers (Figure 1, h).
• Wave (Figure 1, i).

Star and ornamental stripe. Mark a pattern on a board of small thickness and drive in nails without heads:

Net:

Flower girl.

A bracket with a spiral end is bent from a two-millimeter wire. Separately roll up the ring and fasten it, intercepting the sides. At the top, the spirals are connected by three turns of wire (Figure 4).

Furniture. Made from one and a half to two millimeter wire. Its parts are fastened together with coils. Fine-layer plywood or cardboard can serve as a seat and table top. For fastening, small holes are made in the plywood with an awl (Figure 5).

Puzzle. You should separate its parts so as not to bend the wire anywhere or compress it (Figure 6).

Horse. From two pieces of wire 2.5 - 3 millimeters thick, the legs and two lower spirals are bent. From the third piece they make the head, neck and upper spiral. From the fourth - a mane that turns on the back into coils holding pieces of wire together. The mane is soldered in several places (Figure 8).

I. Lyamin, magazine “Family and School”, 1971

Wire jewelry was made by ancient craftsmen. Initially, ancient Russian blacksmiths forged jewelry, chain mail, and weapons, and from the twelfth century they switched to the drawing method. This made it possible to simplify the process of manufacturing thin, even wire, as well as reduce prices for products made from it. The time of wire chain mail has passed, but craftsmen continue to amaze with wire products: hair jewelry, earrings, bracelets, rings, pendants, souvenirs, key rings, three-dimensional objects.

Information for beginners

Although they have been found since ancient times different nations, however, the names of the craftsmen have not survived to this day. Decoration from wrap like the new kind needlework, went down in history with the name of Alexander Calder. He had a penchant for weaving wire jewelry and souvenirs since childhood, when he made earrings and bracelets for his sister, and gave his parents brass animals for Christmas.

He devoted all his activities to making jewelry, toys, and sculptures. He rarely soldered metal parts and more often used the stitching method. This method allows even novice craftsmen to create jewelry. Used for work different types wires (brass, silver, copper, nickel, titanium, aluminum, zinc).

Thick wire is used for the base of the product, as it holds its shape, and thin wire is used to braid wire decorations. Various stones, beads, seed beads, and glass beads can be added to the weaving. When the wire is wrapped with thread, it is already a type of needlework called ganutel.

What do you need for work?

Often, beginning craftsmen make wire products using mixed techniques, applying knowledge from areas such as wire wrap, ganutel, beading, quilling, isothread. First, a sketch is drawn, then it is disassembled into individual elements, patterns, and only then proceeds to practical production. What will a novice wireworker (that’s what a master working in the wire wrap technique is called) need:

• tool,
• all types of wire,
• decorative beads, seed beads, stones.

Weaving wire jewelry is impossible without round-nose pliers, pliers with a pointed, curved, rectangular, nylon “tip,” wire cutters, a needle file (can be replaced with sandpaper at first), anvil (flaheisen), sperak, hammer, wiggic, drawing board, crossbar.

If you are working with copper wire, you can bend it with your fingers or use pliers or other hard objects. To make a pattern from thick material or a more complex design, you need a wiggeek and a crossbar. The first tool looks like a board with many holes and pegs. Place the pegs in the desired order and wrap them with wire, creating an unusual pattern. A crossbar (a metal cone with a thickness of 9-40 mm) will be needed to create bracelets, rings, and chains. At first, the connecting parts can be made with round nose pliers.

To make your home-made wire jewelry look like store-bought ones, purchase sulfur liver. This material is used to pattern copper, bronze, silver, and brass wire products to give a touch of antiquity.

Main elements: pin and spiral

A pin is a wire with a tip, somewhat similar to a pinning needle. To make it, pinch the wire with round pliers, retreating a third from the edge (as much as is left, this will be the diameter of the ring). Rotate the wire 90 degrees. And they begin to wrap the half of the tip of the pliers, forming a ring. Then, near the base, the excess edge of the wire is bitten off, and the ring is leveled using pliers.

The spiral is a simple circle with a ring. This pattern is great for making wire and bead jewelry. Using round nose pliers, pinch the tip of the wire, making a tight circle around the tip. Next, the resulting ring is pinched between the tips and the spiral is carefully wound. The diameter of the pattern depends on the number of turns. At the last stage, pliers pinch the wire from the resulting spiral, and with the free end of the wire they form a ring, as when making a pin. Excess material is cut off with nippers.

Main elements: spring, rings, balls

The spring is used to braid the wire. Wind the wire of the required length tightly onto the crossbar. It can be used to create some individual elements, or put on a pin, creating a voluminous edging, or from braided pins to make an unusual chain for men.

Rings are used as connecting elements, especially if you weave jewelry from beads and wire. The wire is wound around the crossbar (the diameter of the rings depends on its thickness) with a tight twist, like a spring. Then it is removed and cut in the middle with wire cutters. If the space is large, use pliers or fingers to close the ring.

Balls on the edges of the wire are created by heating on a burner (some craftsmen use a regular gas burner). To obtain them, you need high burner power and “unclean” wire, as well as borax, which creates such droplets perfectly even. You can blacken the wire using liver of sulfur and ammonia. The parts are flattened with a hammer, creating new elements.

Wire jewelry: master class for beginners

If you have never tried weaving wire, then you should try your hand at simple examples. To make a bracelet you will need thick and thin copper wire, pliers, wire cutters and a torch (if you are working with a whole coil of wire).

Make rings of the required diameter from thick wire. To do this, find a cylindrical template of the required diameter (pipe). Wrap the skeins with thick wire, connect them in several places with temporary staples (bend the wire to the width of the bracelet rings, cut it, put it on them and pinch the ends).

If you don’t have thick wire, you can buy ready-made cheap bracelet rings, connect them in several places for strength and start braiding. The braiding method involves twisting each bracelet ring from bottom to top and top to bottom using thin copper wire.

The weaving should go one after another; if the wire has moved away, then use pliers to move it closer. If you work with long wire, then during the weaving process it becomes stiff. Therefore, it is heated with a burner (looks like a hair dryer with a flame), and weaving continues. Since copper turns black after heating, the finished product is then treated with citric acid (water is heated, powder is added, the product is boiled for several minutes, then rinsed in an aqueous solution).

You can braid the entire bracelet with wire or attach other wire decorations in the foreground (wire wrap allows connection with stones, beads, flattened wire elements).

Make earrings for the copper bracelet. To make them you will need wire, ready-made earring clasps, connecting rings, decorative elements (stones, beads). Please note that the color of the jewelry should be in harmony with the clasps and wire. If so, gilded clasps with an amber stone. If the fasteners are silver, then take light-colored wire.

So, you need to make large and small rings from thick wire. Make blanks for the second earring in a mirror image at once, placing the parts next to each other. Now, with a thin wire, loosely braid the inner and outer rings. If you want to get more volumetric view, then braid each ring with a spring (or put a spring on the ring), and then braid the products with thin wire over the spring (in this case the braid will be very even).

Next, attach the clasp to the outer ring. Place the beads and stone on the wire and attach them to the inner ring using a connecting ring. You can make the connecting elements yourself. To make it look antique, copper is blackened and varnished. They are obtained as jewelry from jewelry wire.

How to braid a stone for a pendant

It’s good when there is a bead with a hole where you can stick a wire, but if the decoration is made of stone or coin, then what to do? For such cases, a special braiding method is used. You will need round-nose pliers, thin-nose pliers, side cutters without a chamfer, wire (thickness 0.3 and 0.8 mm), stone (cabochon).

Weaving wire jewelry begins with making a frame. Wrap the cabochon with thick wire. Using thin-nose pliers, lift the wire tails up so that the angle is 90 degrees. Leave about four centimeters and cut off the excess material. From this wire you prepare many connecting rings with a diameter of 4 mm.

Cut off 1.3 meters of thin wire, leaving 50 cm, and begin to wind connecting rings to the frame. First, wrap it around the frame with 4 turns, then wrap the ring to the frame with five turns. Next, without breaking the wire, go to the ring and wrap the adjacent element with three turns, smoothly exiting onto the frame.

This is how you attach all the rings. Periodically apply the frame to the stone, if it is convex, and shape the position of the rings. Perhaps, when climbing, you will need to further increase the rings. Connect the last ring with the first five turns, and cut the wire from the wrong side. You twist the ends of the thick wire into a spiral (you can make completely different curls), bend the sides of the resulting pattern, forming a rhombus, and wrap it with the thin wire that you left initially.

Wrong side of the pendant

The front side of the wire decoration is ready, now make the back side. To do this, make the same circle from thick wire, but smaller. Bend the ends of the wire into a tight ring. You need to make sure that both curls fit tightly to each other. The lower part of the product can be flattened with a hammer. Just tap it slowly, slowly - hit one place, see if it’s level, then move on. Otherwise, notches will form.

Now you connect the outer frame, stone and back into a single whole. Secure several places with temporary wire so that the parts fit tightly and do not move. Thin wire now needs to be wrapped around the outer and inner frame where there are voids (between the connecting rings on the outer part).

The last step is to make a pendant loop from a braided ponytail with curls. To do this, using a steel knitting needle, carefully and slowly bend it so that the curls are located on the connecting rings of the product. Now thread the lace or ribbon. As you can see, jewelry made from copper wire is no worse than jewelry.

Please note that the stone on the jewelry is held in place by external patterns (connecting rings, curls), which are secured to each other with coils. If the wire lies loose, the cabochon will fly out.

Wire hair jewelry

You can easily make bobby pins, hairpins, and combs from wire. The simplest option is to string a bead on a wire, make a flower shape with a curl and attach it to the base. A more interesting pattern will be made from flattened wire. Then leave the end for the bead, and slowly flatten the rest of the wire, at the same time giving shape. In this example, you wrap the wire around the bead, then move on to the petals, ending with a spiral curl. Put the bead on, make sure the wires fit snugly together, and solder it to the base.

Let's take a closer look at how to make jewelry from wire, beads, and seed beads. On a piece of paper, draw a diagram of the hairpin, starting from the curl and moving to the outer circle, the end of which goes into another spiral, located above the first. It turns out to be a circle with two internal antennae. This element is done continuously. Then, at the point where the two curls touch, use a thin wire to braid them with several turns.

• there are six turns between the beads;
• there are eight turns between the small beads;
• There are ten turns between the large beads.

The distance is determined by the diameter of the decorative material. The weaving begins and ends with small beads, and in the middle there are large beads. The curls are braided only with beads. Next, make a hairpin. Fold the wire in half so that one end is a couple of centimeters longer. Attach it to the hairpin; the hairpin on each edge should be 5-7 centimeters larger. Excess material is cut off. Twist the hairpin from the middle and twist the ends into a spiral.

To make jewelry made of copper wire harmonize with the frame, thread beads into the curls (one piece at one end, braid the other with 3 beads, 5 beads). There is no need to braid the entire hairpin to prevent your hair from getting tangled. Only individual antennae and a distance of 0.6 -1 cm between them, forming a triangle.

Simple ideas for original products

Handicraft stores offer a huge range of different decorative elements for making jewelry. Buy a few, it will save your time and enrich your knowledge (now you will know exactly how to make connecting rings, fasteners, clamps). Such DIY prefabricated wire decorations are no different from store-bought ones (except at an affordable price).

Here is an example of how to make an ethnic decoration from square elements with round voids. From thick wire, bend a square (the corners should be straight) and a smaller circle. Place a square, a circle inside it, and braid the shapes with thin wire. Another option is to put a spring on the wire before connecting each figure, and then braid them. You will get massive decorations.

To match the necklace with earrings and bracelet, repeat the same pattern. In the example with square earrings, the necklace will be a simple one made of beads, and attach a pattern of squares in the middle. Another example of an original wire decoration (master class for a two-color bracelet):

• Divide the wire into equal pieces;
• using sewing wires, connect the light ready-made half-arcs and the dark wire in turn;
• attach fasteners to the edges;
• form the resulting line into a bracelet of several rings.

Bracelets can be made without clasps; they are simply put on your hand. The shape of a snake or arrow is most suitable for such a wire decoration (photo of a hand with bracelets).

Brief conclusions

It is better to train your hand and dexterity on copper wire when making simple hairpins, rings, and barrettes. If you don’t have specialized equipment and tools, don’t despair. Use your imagination. Instead of a burner, use a gas stove to create droplets (and you can’t do without borax, it creates a perfectly flat surface). Replace Wigjik with sleight of hand, pliers and paper diagram. The crossbar can be replaced at the initial stages by knitting needles of different diameters.

To avoid patination of wire jewelry, use non-oxidizing wire. You can coat the decoration with varnish for durability. If you need to create a patina, wash the wire well in a lemon solution. Then place it in warm water, apply a thin layer of sulfur ointment (pharmacies sell it) on your fingers, and wash the material under water. Without removing it from the water, wash off the sulfur with regular dish soap and wipe it dry.

Or you heat the wire over a fire, and then lubricate the warm wire with baby cream and rub until the desired result is achieved, then wash it off with soap. Again, patina is an acquired taste and is created through trial and error. You can do without the antique color. Some people just paint it gold or silver acrylic paint, varnished.

There is no exact information on how to make a wire decoration. Each master finds something of his own, talks about it in his master classes or simply offers his creation. Try your hand at simple products, practice on finished products masters: mentally divide the decoration into its component parts and reproduce it in practice.