How to weave a heart from rubber bands? Step-by-step photo and video lessons. How to weave a heart from rubber bands on a slingshot How to make a heart from rubber bands

⁰

Are you interested in making jewelry from rainbow loom bands? Read how to weave a heart from rubber bands, as well as a bracelet called “Angel Heart”. These products look very cute and romantic. They will help you emphasize your individuality and simply attract attention.

Accessory options with hearts

If you've been wondering how to weave a heart out of rubber bands, then you've probably decided to make a romantic accessory for yourself or give someone a gift for Valentine's Day. It is worth immediately identifying two types of products - those that are woven from voluminous hearts, and those where this element is built in the form of a pattern obtained by interlacing elastic bands in a special way. The first way is to make the following accessories:

keychain;
pendant;
bracelet;
hair band;
ring;
earrings.

The second method is used to weave mainly only bracelets, although this option is also suitable for creating a ring and a headband.

Materials and tools

Before learning how to weave a heart out of rubber bands, look at the list of what you will need, prepare everything at once and start following step by step instructions. So, you will need the following:

Rubber bands of one or more colors.
Hook (special or regular crochet).
Slingshot, machine or alternative tools (homemade devices or just your own fingers).

How to weave an angel heart from rubber bands or an ordinary heart pendant, choose for yourself. The bracelet is easily made using a slingshot. A machine with two posts is also suitable. Weaving on the fingers is possible, but some actions are not very convenient to perform with one hand when the other is used as a working tool.

How to weave a bracelet from rubber bands “Angel Heart” (getting started)

This decoration, consisting of a chain of openwork hearts, is not very difficult to make. The sequence of work is as follows:

Place an elastic band of color No. 1 on both posts of the slingshot, crossing it in a figure eight.
Place a second rubber band, color #2, over both horns, without twisting, as you did all subsequent ones.
Throw the first elastic band from the left column through the top to the middle.
Move the top elastic band from right to left.
Place another rubber band in color #2 over both horns without crossing.
Remove the bottom loop from the right post through the top to the middle.
Transfer the top loop from the left column to the right one.
Place an elastic band in color #1 on both horns.
From each horn, remove the top elastic band of color No. 2 from the loops to the middle.
Place color #2 elastic on both horns. From this moment there will be a sequence of steps that will be repeated in the future until the required length of the bracelet is obtained.

Pattern pattern in weaving bracelet

The sequence below from steps 1 to 8 is repeating:

Throw the bottom loop from the left column to the middle, and then transfer the top one from the right to the left.
Place another rubber band in color #2 over both horns.
Throw the bottom loop from the right column over the top to the middle, and then transfer the top one from the left to the right.
Place an elastic band of color No. "1 on both horns.
Fold the top loop of color No. 2 from the left column to the middle.
Through the next loop of color No. 2, pull the hooked bottom elastic band of color No. 1 and also throw it to the middle.
Now you need to do the same with the right column. Throw the top loop to the middle, and pull the bottom loop through the previous elastic band and also throw it to the middle.
Put the elastic band of color No. 2 on both horns again.
Throw the bottom elastic band of color No. 2 on the left horn to the middle, and move the top one of color No. 2 from the right to the left. You can assume that you know how to weave an angel heart bracelet from rubber bands. After all, this step is already a similar course of a repeating sequence of actions.

When you reach the required length, you need to secure the bracelet. Throw the bottom loops from both posts to the middle through the top. Place an elastic band of a matching color on both horns. Remove the lower loops again to the middle, and transfer the remaining upper loop from the right column to the left. Stretch a pair of elastic bands from the left column to both and carefully put on the clip-lock. Attach the second part of the clasp at the beginning of the bracelet.

The product is completed.

Your product is double-sided. If you used a contrasting color scheme, then the sequence of hearts and the weaving of the middle part are clearly visible in the pattern. To master the principle of weaving and remember the sequence of steps, you can make your first bracelet from identical rubber bands. You will learn how to weave an “Angel Heart” from elastic bands, remember the steps of work, and then you can use two color shades, but it will be easier to weave when you don’t have to look at the instructions at every step. You will clearly understand which elastic band forms what - a heart or a middle, so you can even combine hearts of different shades in one bracelet, for example, two after two identical ones with a contrasting middle.

How to weave an angel heart without a slingshot

If you do not have the specified device, you can completely do without it. If you have a machine, it is enough to use two posts from your design. If you don’t have this tool, but still want to make a bracelet, you can try making it directly on your fingers. Use the middle and index fingers on your left hand if you work with your right hand. Another option is to make something like a slingshot yourself. You can take a plastic disposable fork and remove the middle two tines, or assemble a tool from felt-tip pens or any other rods or sticks.

How to weave a heart shape from rubber bands

The instructions below are for weaving using only a crochet hook. It's quite convenient and fast. When choosing rubber bands for weaving, buy the smallest diameter and even ones, otherwise the figure may turn out sloppy. If you can’t weave a heart out of rubber bands on a machine, then you can definitely master the crochet version.

The sequence of work will be as follows:

Place the first elastic band on the hook and wrap it around it an additional two times. You get three loops.
Take the next two rubber bands and thread them into the rings on the hook, removing them from the tool. Place the second ends of the paired elastic bands on the hook as well.
The right pair of loops remains unused for now. Work on the left side. To make it you will need seven rubber bands.
Take the first one and thread it through the left pair on the hook, removing it from the tool.
Place the left loop from the first pair back onto the hook, and then the left end of the working elastic.
Take the next elastic and thread it through the two leftmost loops, removing them from the hook, then repeat the sequence from the previous step.
Repeat the previous step with five more rubber bands. Seven pieces are used for each half of the heart.
Take the second hook and carefully place all the elastic bands onto it in sequence.
Turn the hook over and braid the second half of the heart in the same way as the first of the seven elastic bands.
Take another elastic band and place the leftmost six loops on it. Place both ends of the elastic band on the finger of your left hand.
Of the next six elastic bands, swap the left three with the right ones, that is, going to the right.
Place the three elastic bands moved to the left onto the right loop on your finger.
Take another elastic band and thread it through the remaining loops on the right side of the hook.
Fasten the four loops that appear to create a keychain.

Heart bracelet

Do you want to know another way to weave a bracelet from rubber bands? The heart, made according to the instructions in the previous section, can be used as the main element. It is beautiful to use in one copy in the center of a woven thin bracelet.

Another option is a strip of repeating similar hearts. To do this, you need to continue weaving the next heart on the remaining four loops according to the instructions above. Weave the required number of hearts to suitable length bracelet, install the clip and you can try it on.

So, you have learned how to weave a heart from rubber bands and very beautiful romantic bracelets. Create a spectacular set of original jewelry for yourself and your girlfriends.

If you wonder how you can weave a heart from colored rubber bands, you can expect that you already have certain weaving skills. Therefore, nothing is easier than considering different manufacturing techniques.

Types of weaving from rubber bands

There are several weaving options. They are divided based on:

On fingers. The own fingers of the free hand are used as the basis. This takes up an entire hand to operate, thus limiting the ability to work with multiple elastic bands or complex knots.
On a slingshot. A slingshot is used instead of fingers. You get a second hand to manipulate, and now your actions are limited only by the number of bases.
On the machine. There are no restrictions. There are many bases and you can use several blanks to make complex knots and shapes. You can change the number of bases directly during operation.

In such needlework, they mainly use weaving machines. They make the task as easy as possible and contribute to the speedy completion of the product.

Hobby prevalence

Today, many people are engaged in rubber weaving. This includes schoolchildren, housewives, students and simply creative people. This way to keep yourself busy is interesting and exciting. Hence its high popularity.

However, such a painstaking task requires perseverance. To come up with your own products, rather than using ready-made diagrams, you need to have spatial thinking. All this comes with experience, and wonderful products are obtained.

What you need for weaving

In addition to your imagination and ingenuity, you will need the following items:

Base. The thing on which the elastic bands are held during weaving. It could be fingers, a slingshot or a machine.
Rubber bands. There are different colors And different lengths. The choice depends on what you are going to do.
Crochet hook. Not a required attribute, but often useful for creating some nodes.
Knowledge. To get it ready and beautiful product, you need to know how to do it.
Perseverance. This hobby is not for those in a hurry. It requires time and attention.

There is no need to be upset if it doesn’t work out right away. It’s better to start with simple knots on two or three elastic bands.

Heart made of rubber bands on a machine: step-by-step instructions

Patterns for weaving different keychains and bracelets are easy to find on the Internet; in order to get a beautiful decoration, you need to strictly follow the pattern and be careful not to confuse anything. To weave a heart, you need to consistently perform the following actions:

Prepare a workplace, diagram, rubber bands (at least 72 pieces).
Place the first elastic band on the middle base (4) and twist 4 times.
Throw 2 more elastic bands on top of the first one and secure it to the base of the same column. Drop the bottom one over these two.
Fold the new elastic in half and throw it over the adjacent 2 bases (3 and 5) in the same line as the first.
2 more pieces for these bases.
Then proceed according to the scheme, making similar nodes.

Look video lesson weaving on a machine Monster Tail colored hearts:

It is not at all necessary to have a machine for such a task; you can get by with improvised means.

You will need 4 forks, they need to be connected with teeth in one direction. Twist a couple of forks with tape so that the handles are together and the tines at the end diverge in different directions. Twist the second pair of forks in the same way, then put both pairs of forks side by side and wrap them with tape so that they do not move.

From the teeth on one side, some semblance of a machine is obtained.

Where to get diagrams

Without a diagram you won't be able to do anything. Where to get them and how to learn to read - you need to look for them on specialized forums, or in video tutorials on weaving, of which there are two in this article. At first it may seem difficult, but it’s worth keeping in mind that even children are into this hobby and almost everyone is great at it.

Video courses are also intended for beginners. Valuable knowledge is given completely free of charge.

There are collections of diagrams and even programs that allow you to create diagrams yourself. For example, you want to do something unique, but you can't find a pattern. Then you use the program, draw up a diagram, and the program will tell you how much material, blanks, and bases you need.

You need to start with simple and understandable keychains, gradually move on to complex and advanced ones. This is the only way to achieve rubber weaving skills.

Below is a step-by-step photo lesson with patterns for weaving from 146 elastic bands:

End of work

To prevent the resulting decoration from falling apart, you need to make special knots at the end, the so-called “lock”. They are different types, use one that won't spoil appearance. If the result is unsatisfactory, you can always disassemble it into components and do it again.

When you decide how to weave a heart from rubber bands, you will be ready for more complex and large-scale projects and crafts.

Step-by-step video lesson

In just a few minutes, you can create a stylish “Angel Heart” rubber band bracelet with a beautiful pattern! The product is very voluminous, and the surface of the bracelet is decorated with openwork hearts! When making an accessory with such a pattern, it is best to use contrasting shades of elastic bands so that the inner chain does not merge with the hearts themselves!
The weaving pattern for this decoration is quite interesting and simple.

So, it’s worth preparing the following materials:

— rubber bands in two different colors;
- any hook for weaving;
— small machine “Slingshot”;
— S-shaped clasp.

To begin with, it’s worth deciding on the shades to use and preparing them. In this case, the main chain will be green, and the outer hearts will be yellow! Put a rubber band twisted in a figure eight on the slingshot.

Almost every bracelet weaving begins in this way. Add another one on top, put it on both posts of the machine in the usual way.

Drop the bottom one on the left side, placing it in the center.

But carefully grab the top one on the right and move it back to the left column of the machine.

On this side of the slingshot, you need to perform the same actions.

To the elastic band in the center, in the future you will need to hook the clip.

After that, another elastic band is added, but this time green, for two columns at once!

The second loops on the posts (yellow) must be dropped to the center between the two “horns” of the machine.

As necessary, lower the product down the columns to make room for adding new rubber bands. Then, add a yellow elastic band to both posts of the machine.

Grab the bottom elastic band on the left with the hook and remove it.

Throwing the top right loop over to the side of the machine from which the bottom one was removed!

You need to move it very carefully so as not to confuse the top and bottom loops. To do this, you can hold them with your finger until the next removal. With the next elastic band thrown on, you should do the same steps.

As a result, three rubber bands remain on the machine on each side.

After this, you need to add green.

Remove the first yellow one from the column.

Place the hook under the remaining yellow elastic band and hook the last one.

Afterwards, reset it to the center. Do the same on the opposite side.

These actions are the main ones in weaving the “Angel Heart” pattern. By doing them, your jewelry will soon reach the desired length that suits your wrist.

You need to finish the weaving in the following, very simple way. When there are two rubber bands left on the machine, remove the bottom one from the “horns”!

Place all four stitches onto one stitch.

Then, fix the clip on them!

Now all that remains is to find the first elastic band at the beginning of the product and also attach the S-shaped fastener to it.

This is the bracelet we ended up with!

Final view. Photo 1.

Final view. Photo 2.

Final view. Photo 3.

We also published a detailed master class on how to make your own machine for weaving from rubber bands, which is functionally no different from the factory ones.

Silicone rubber bands Lately became very popular. Absolutely everything is woven from them: bracelets, keychains, various figures and much, much more. In today's article we invite you to consider detailed master class on weaving cute and charming hearts from rubber bands.

There are several ways to weave rubber bands: on a machine, using a hook, or on a special slingshot.

Of course, it is most convenient to weave from high-quality material and on special equipment - on a machine, but if it is not difficult for you to find the material itself, since there are numerous fairly high-quality Chinese fakes on the market today, then there may be problems with the equipment. That is why we invite you to consider a method of weaving hearts without a machine and other specialized tools. And for greater clarity, at the end of the article we will provide detailed videos main styles of weaving: loom, crochet and slingshot.

Using a hook

Most affordable option- this is crochet weaving, really volumetric figure You won’t succeed, but these hearts are also very cute. For example, from such hearts you can weave an original bracelet or keychain.

But before you get started, it’s worth considering a few simple rules:

When choosing rubber bands, try to choose the smallest ones, with a minimum diameter, otherwise your hearts will turn out sloppy.
The hook should be as comfortable as possible for you, preferably with a silicone handle and a suitable size.
For this type of work you will need two hooks.

Completing of the work:

We put one elastic band on the hook and wrap it around it two more times. This gives us three loops.

Next we put on two elastic bands and pull them through the previous three loops.

Thus we should get the following.

Take the next elastic band and put it on the hook.

We pull the two nearest loops through it.

We put the outer elastic band of the double loop on the hook, and then the loop of the stretched elastic band. Shown in more detail in the photo below.

We put on 8 more elastic bands in the same way.

Now it’s time for the second hook, onto which we pull all our loops. This is necessary for weaving the second half of our heart, for weaving which we repeat everything from step 2.

This is how it should turn out in the end.

Next we need to connect these two halves. For clarity, a different color rubber band is used in the photo. We pull the lilac elastic through the first six loops and fix it on the finger.

From the remaining loops we separate 6. We cross the first three with each other and the last three. We do all this without removing the loops from the instrument.

We move the first three loops onto the lilac elastic band.

Weaving beautiful hearts from rubber bands using photo and video tutorials

Continuing the theme of weaving with elastic bands, we suggest you weave a heart-shaped figure. These lessons will help you learn how to make a heart in different ways.

Materials for work

This wonderful heart made of rubber bands can be woven using various techniques.
Some weaving methods do not require the purchase of additional tools. You will do an excellent job with needlework if you have ordinary household forks, two or four, depending on the chosen heart model. This technique is quite simple and convenient.

But there is an opportunity to do it even simpler, and weave a heart from colored rubber bands using your own fingers. Such handicrafts are sometimes done simply to pass time while away from home, where there are not even forks. This is the most primitive type of heart weaving, when only fingers are involved in the work. This technique involves making a limited number of heart models, because it is impossible to use complex patterns or units, as well as the use of a large number of elastic bands, which narrows the possibilities of needlework.
There is a craft technique using a plastic slingshot that frees up your hands and allows you to manipulate them freely. In this case, the choice of pattern is limited solely by the fact that the slingshot has few pegs for weaving. Many needlewomen prefer to weave hearts with hooks, which also somewhat limits the choice of pattern, but is extremely convenient because it allows you to work anywhere outside the home. You just need to bring along suitable metal or plastic tools. The most complex three-dimensional models of hearts made from rubber bands are woven on a special machine. In this case, you can freely choose any scheme with the most complex nodes, without restrictions. The thing is that the machine is equipped with many bases in the form of columns, the number of which varies according to your desire. This greatly expands the possibilities of needlework. In this master class we will try to look at how to weave a heart from rubber bands using some of the most popular techniques.

Video master class on weaving a keychain with hooks

The needlework technique discussed in this video master class is used by craftswomen to weave hearts from rubber bands very often. We will need two hooks and a paper clip, which will help us in our work. Instead of a paperclip, any pin will do just fine. The fact is that the weaving technique involves making two halves of a heart. When we finish weaving the first half, it is placed on a paper clip, and then the second part of the product is knitted. The first two elastic bands are put on in a figure eight on both hooks, then we pull two more irises through the right half. The same actions are performed when weaving the other side of the work, resulting in a symmetrical workpiece. Let's break the symmetry and move the loop from the left side to the right. Now we will pull two parts through two loops out of three, and again we will get three loops on the right, with which we will continue the weaving process.
At this stage of work, the loop on the right is transferred to the left to recreate the symmetry of the workpiece. Then we add details to the tools, and again move the left loop to the right, breaking the symmetry. We change the color of the irises depending on desire. Having finished the first part of the heart, we transfer it to a paper clip, and similarly weave the second half of the heart. Having formed the second part of the product, we place a half on each hook and combine them together in the manner shown in the attached video. To connect the two halves together, you need to use a few extra elastic bands, not only connecting the pieces, but also forming the final pointed heart area. At the end of the needlework, the entire heart is transferred to a post and secured with a knot from the last iris.
Video: Weaving colored hearts with crochets

Heart made of rubber bands on a slingshot

The next stage of training we will look at how to make a heart from rubber bands on a mini slingshot machine, because it is as close as possible to a classic machine. Let's prepare twenty-five rubber bands, a slingshot and a hook. We screw the first part three turns onto the slingshot post on the right. Then we will throw two irises on both pegs of the slingshot, and raise the lower elements and place them in the center of the upper ones. We continue weaving, putting two units on top of the work, and lifting the lower ones up to the center. When the number of elastic bands used has reached ten, we transfer both sides to the post, and put the last free loop on the second peg. Next, we weave a heart using the next ten irises, and using the same needlework technique. Let's continue to work, performing all the actions that we see in the lesson. Moving from the wide area of the figure to the narrow one, tighten the very last elastic band. This loop will be the final and securing one. We received a beautiful heart that can be an excellent keychain.
Video: Heart weaving

How to weave a heart from rubber bands on a machine

At the end of the lesson, you should understand how to weave a heart from rubber bands on a classic loom. First, let's prepare a workplace, a machine and seventy-five rubber bands. Twist the first rubber band four turns and place it on the peg. We put two more pieces on top of it, and we throw the bottom one over the top.

We fold the next elastic band in half and put it on two adjacent pegs that are on the same line.

We carry out the first node according to the diagram.

Next, we continue to work according to the same scheme and the same technique.

To prevent the weaving from falling apart into separate parts, it is necessary to make securing knots at the extreme points. Having finished the needlework, carefully remove the finished heart from the pegs.

As a result, you will get these voluminous hearts.

In order to understand even better how to weave a heart from rubber bands on a machine, you are invited to watch the video lesson with detailed explanations.
Video: Volumetric heart from rubber bands

Comments

How to weave a snake from rubber bands using photo and video lessons