How to iron tulle. How to iron tulle after washing

⁰

A tulle curtain is an excellent decoration for a window opening. Over time, it loses its fresh and neat appearance. I have to wash it. But what to do after washing? How to iron tulle made from various materials without ruining it? Is it possible to do without an iron? Let's figure it out.

Only freshly washed tulle can be ironed. To do everything correctly, I suggest you find out the important points, since the quality of ironing depends on the correct washing.

Proper washing

Large tulle can be washed as in washing machine, and manually. For the most part, the sequence of steps is the same for both methods. The only caveat is that when washing by machine, you need to select the “no spin” mode or turn on the minimum number of revolutions (no more than 500).

Instructions on how to quickly and efficiently wash curtains with your own hands:

Image	Recommendations
	Stage 1. Soaking Pour 5–6 liters into a basin. warm water. Add 5 tbsp to the water. l. soda (or soap shavings). Mix thoroughly until smooth. Soak the tulle and leave for an hour. If the curtains were last washed a long time ago, you may need to repeat the soaking 2-3 times.
	Stage 2. Main wash Wear protective gloves on your hands. Add liquid to water washing powder(1 cap). Using your hand in a circular motion, mix the tulle thoroughly (as in the photo). Imagine that you are kneading dough.
	Step 3: Rinse Drain dirty water. Type into the basin clean water and carefully rinse the curtain. It is advisable to change the water at least 3 times to completely wash away any remaining detergent. The last time you need to rinse the curtain in cold water.
	Stage 4. Spin Lift the tulle slightly above the container of water. Let the water drain gradually. As soon as the bulk of the water flows from above, lift the canvas higher. You need to continue until the entire product is removed from the basin.

Smoothing the tulle

Useful tips presented in the table on how to iron tulle at home:

Image	Recommendations
	Tip 1: Check your iron It is prohibited to use an iron with a burnt sole or if it is not possible to regulate its heating temperature.
	Tip 2. Optimal mode and temperature Ironing temperature- no more than 120 °C. Mode- steaming (except organza). This function will perfectly steam the resulting wrinkles. If this mode is not provided, use a damp cloth as a backing.
	Tip 3. Process only from the wrong side Curtains can only be ironed from the wrong side. To speed up the process, the tulle needs to be folded several times, while trying not to iron the folds.
	Tip 4: Damp cloth The secret to successfully ironing curtains is to process the fabric slightly damp. Start ironing while the fabric is still damp (except organza). So, there is less chance of ruining the tulle.

If you have a hand-held steamer, then you are very lucky, since it is most effective to iron tulle while it is already suspended.

Steam generators do a great job with most household chores. Their high price is compensated by a wide range of applications.

4 types of fabric - 4 ironing methods

Tulle curtains are made from a variety of materials. Most often you can find fabrics made of synthetics, linen, organza and cotton.

There are differences and how to properly iron each of the listed types of fabric:

Image	Recommendations
	Type 1. Synthetics Fold the wet veil several times with the wrong side up. Take an iron (or gauze). Preheat the iron to 120 °C and process the entire fabric, from edge to center. Synthetics must be ironed, since the material cannot straighten out under its own weight.
	Type 2. Linen Linen fabric practically does not wrinkle, so you can hang the curtain on the curtain rod immediately after washing. If you need to iron it, turn on the device at 100 °C and iron through gauze.
	Type 3. Organza Organza, unlike other materials, can be processed only after complete drying. You cannot steam such fabric; only uniform ironing through paper at a minimum temperature will do. The process of straightening organza is quite labor-intensive and takes quite a lot of time.
	Type 4. Cotton Hang the slightly damp veil back in place. Cotton tulle will straighten under its own weight.

Bottom line

We found out that at home you can easily iron tulle curtains made from various fabrics. The main thing is to take into account the recommendations for washing and the basic rules for ironing such fabrics. The video in this article will show the methods in action. If you have any questions, I’m waiting for them in the comments.

Tulle fabric for curtains has to be washed frequently, as the mesh and patterned surface quickly becomes filled with dust. After washing, as a rule, it is time for ironing, but this material is especially delicate and thin, so not all housewives know how to iron tulle correctly. Additional difficulties are created by the large length and width of the curtains. People's ingenuity produced simple rules, allowing you to quickly tidy up your elegant fabric.

Fabric structure
There are two important factors in ironing - the composition of the fabric and the temperature of the iron, let's talk about the first. Tulle is made from various threads; there are options based on silk and cotton. But in ordinary city apartments, most often, curtains made of synthetics are hung; they come in different thicknesses - one or two threads. It is worth considering that tulle with an abundant pattern is denser than smooth fabric. But thin synthetic or cotton curtains don’t need to be ironed at all; experienced housewives lightly dry the product, hang it wet on the window ledge, so the elastic threads straighten themselves.

A thick synthetic curtain woven in two strands will not iron out without an iron, so you will need these instructions:
You need to iron a product that is not completely dry;
select the “nylon” or “polyester” option on the iron (up to 80 ° C);
Place it on the ironing board, wrong side up;
try ironing on the edge of the fabric;
iron the edges of the panel first, then the center;
Spread the freshly ironed curtains on a bed or wide table for 5 - 10 minutes to allow the effect to set.

Tulle made from artificial threads should only be ironed through gauze. For silk products, instead of gauze, it is better to take thin white paper.

How to iron tulle if it is dry

In a situation where they were not ironed on time, you have to straighten the dried creases with an iron. Here's how to quickly iron cotton tulle:
switch the iron to the “silk” or “synthetic” mark;
Use your palm moistened with water to rub the largest creases so that they straighten out;
iron through damp gauze, starting from the edges to the center;
When ironing, the iron must be moved towards you;
let rest for 5 minutes. after ironing.

The same procedure applies when ironing dry curtains made of silk material. The main thing to remember is that no matter what kind of tulle you use, you should not use a steamer; it can leave a streak on a thin surface. The flounces and frills are smoothed with the tip of the iron. First, the spout is inserted vertically into individual fragments of the shuttlecock, then the entire frill is ironed along its length. And curtains with a convex ornament are ironed only on the reverse side.

How to iron tulle - capricious organza

Curtains made from delicate organza require special attention. Shiny and elastic fabric is ironed in a special mode:
1. After washing, dry the curtain well.
2. Set the iron to the “nylon” setting.
3. Lay the product on the ironing board, wrong side up.
4. Use dry tissue paper as gauze.
5. Gradually move the curtain as you process.
6. Move the iron towards you.

There is a second option for ironing organza curtains. For this you need a steam brush. The curtain is hung on the cornice and treated with a brush in the “steaming” mode. You cannot use an iron with a steamer for such tulles. This treatment will cause the fabric to become uneven and lose its gloss. Inventive housewives know how to iron tulle without difficulty or worry. If you follow the basic principles - attention and accuracy, the process will only bring pleasure.

How to iron tulle? Such a light, transparent and quite beautiful material, like tulle, is used for sewing various clothes ( wedding dresses, underwear), as well as for creating chic curtains and drapes, canopies or bedspreads. In addition, this material can act as a decoration for a designer interior.

Although tulle is considered a luxurious product, caring for such material is quite problematic. Many people ask the question: “Do I need to iron tulle after washing?” Experts say that washing and ironing this material comes first in caring for tulle. To preserve the color, purity and quality, tulle should be washed at least three times a year. What mode to iron tulle on depends on the type of fabric.

In this article we will try to describe how to iron tulle correctly, as well as how to wash this material so that you don’t have to iron it later.

Ironing tulle from various materials

How to iron tulle correctly without ruining the material? To create tulle, various types of fabric are used, namely: cotton, linen, silk, organza, nylon, polyester and viscose. Due to such a variety of materials, several techniques have been developed for ironing tulle after washing. Let's take a closer look at how to iron a product made from various types fabrics.

How to iron nylon tulle? Some argue that nylon tulle doesn’t even need to be ironed, since the material is quite durable. After you wash the product, you just need to hang the tulle on a curtain rod or rope. During the drying process, the nylon material will straighten itself. However, there is another approach to caring for the product. Experienced housewives strongly insist that nylon tulle needs to be ironed. How to do it?

The fabric must be damp, so after washing the tulle must be ironed immediately.
Before ironing the entire surface of the material, you need to first start with a less noticeable area to check whether the ironing mode is suitable or not.
Iron the product with light movements, practically without touching the sole of the iron to the fabric. In addition, you should put a special attachment on the sole of the household appliance that does not leave marks on the material.
If you don't have an iron attachment, you can place a clean piece of gauze or a white piece of paper on top of the product.

How to iron organza tulle? Ironing such material is extremely difficult and time-consuming, since organza is a rather capricious material.. In order not to spoil the organza tulle, you need to follow some rules for ironing the product:

The soleplate of the iron must be clean and free of chips.
An organza product should be ironed only when the fabric is completely dry (otherwise the material will lose its beautiful appearance and straightens), setting the most minimal mode.
To prevent waves from forming on the fabric, an organza item should be ironed exclusively through silk fabric, without turning on the steam mode.

If you want to immediately place the organza curtains on the cornice after washing, then you should smooth the material exclusively with your hands, occasionally wetting the product with some water (you can use a spray bottle).

To prevent creases and folds from appearing on the material, it is not recommended to hang the material on a rope (in this case, the fabric will be folded in half, and this is the first reason for creases to appear).

You can also iron organza tulle with a steam generator iron. The curtain needs to be hung on a crossbar, and then hot steam is passed from top to bottom along the surface of the material. If there are folds on the fabric, then you need to go over the product again with a steam generator.

Experienced experts advise rinsing the organza tulle in salted water after washing (for five liters of liquid you will need about twenty-five grams of salt). This method will make ironing the tulle faster and easier, and will also prevent the sole of the iron from sticking to the fabric.

How to iron polyester tulle? This material is best ironed when the fabric is damp. At what temperature should you iron tulle? The optimal temperature is considered to be within one hundred ten or one hundred twenty degrees. Ironing of polyester tulle is done from the wrong side through a damp gauze section.

To smooth tulle made of cotton or linen, it is necessary not to turn on the “Push-up” mode when washing the product. Otherwise, the fabric will be more difficult to iron. You can hang the tulle on the cornice, and then the material will straighten out on its own. And if you decide to iron the tulle, then you should set the temperature to one hundred degrees. It is advisable to place a gauze cloth on top of the wrong side of the material.

How to iron veil-tulle and mesh-tulle? Both types of fabric are ironed while the fabric is still wet. To iron the veil and mesh, the temperature should not exceed one hundred and fifty degrees. The product must be ironed from the wrong side through a damp piece of gauze.

How to wash without ironing later?

How to wash tulle without ironing? In this case, it is best to use the hand washing method. Pour cool or lukewarm water into the bathing tank, add washing powder or detergent composition that is suitable for a specific type of fabric. If there are yellowish spots on the product, you can add salt or soda ash to the water.

Do not rub the fabric during washing. The fabric needs to be slightly smoothed and compressed. If you are washing organza or silk tulle, then such material must be washed and hung immediately. Other types of fabric can be soaked in water for a while.

After the product has been washed, it must be rinsed thoroughly in cold water and hung to drain off excess liquid (it is not allowed to wring out the tulle, otherwise the fabric will be difficult to smooth out later). If you washed the curtains, you need to hang them on the curtain rod. If you washed another tulle item, you can use a rope. The material needs to be straightened, all folds removed and checked to ensure that parts of the product do not stick to each other.

If your tulle is made of cotton or linen, the fabric can be washed in washing machine, but only on delicate mode without spinning at a temperature of forty degrees. At the end of washing, the product must be rinsed in clean, cool water, then hung to allow all the liquid to drain, and then straighten the material from wrinkles.

To properly iron tulle after washing, you need to take into account several important recommendations from experienced specialists:

Before washing or ironing a tulle product, you need to read the labels on the label, which will tell you how to wash the product and at what temperature to iron it.
To iron tulle, you should always use a wet gauze cloth or white cotton cloth.
Some items need to be ironed while still damp and only on the reverse side.
The surface of the electrical household appliance must be clean so that dirty stains do not remain on the tulle product.
The ironing temperature of any type of fabric should not be higher than one hundred and fifty degrees. The most acceptable temperature is about one hundred and twenty degrees. But at the same time you need to look at the label: the required temperature regime will be precisely indicated there.
The seams on the product also need to be ironed only from the inside, lightly touching the sole of the iron.

If you want to iron very long curtains or tulle curtains, you must first place the top of the product on the ironing board, iron it, and then hang it on the curtain rod so that the unironed part of the product remains on the board. This is how you can iron long fabric.

Having read this information, you now know how to properly iron tulle after washing without spoiling the material. In this case, the main thing is to adhere to the recommendations described above, and then your product will have an impeccable appearance.

Tulle curtains are found in almost every home. They not only protect our home from the sun, but also make it more comfortable. In order for them to remain beautiful for many years, every housewife simply needs to know how to properly care for them. For example, before ironing tulle, it is very important to determine what material it is made of - silk, cotton, viscose or polyester. Usually the product has labels from the manufacturer with care instructions. If you don't find anything, use our tips.

Natural cotton tulle

Many housewives hang cotton tulle curtains on curtain rods immediately after washing, when they are still damp. Under their own weight, they gradually straighten, and after drying, their appearance is no different from the ironed version.

What if you couldn’t immediately hang the curtains on the window and they dried out? Then set the iron to the minimum temperature setting and iron the product from the wrong side through damp gauze.

Tulle curtains made of synthetic materials

In recent years, synthetics have increasingly begun to replace classic lace curtains. And it’s not surprising, because such tulle curtains are more original, light and airy.

Try to iron immediately after washing, when the curtains are still damp. It is better not to moisten them with a spray bottle, because small droplets of water may leave streaks on the tulle.
The steaming function can be used for viscose. Iron it from the wrong side.
Iron silk and polyester while damp on either side through a clean sheet of paper.
When ironing, avoid high temperatures. The temperature should be 110-120 degrees. With more high temperature white material may turn yellow permanently. First, try ironing it in an inconspicuous place from the inside out. If everything is in order, iron the entire product in the same mode.
Tulle with a relief pattern should be ironed from the wrong side without using steam.

Synthetic fabric cannot be ironed without an intermediate layer. This is especially important if the product is white, because iron marks may remain on it. To do this, use cotton cloth.

Organza tulle is as finicky to care for as it is beautiful. This amazingly beautiful transparent fabric is made from polyester, silk or viscose. There are several ways to iron an organza curtain.

Set the iron to the minimum temperature setting. The soleplate of the iron must be smooth and clean and the fabric dry, otherwise it will not straighten. Only stroke the orgasm through silk or tissue paper. Do not use steam mode, because small waves will remain on the product.
Immediately after washing, hang the tulle in its place. Straighten each section, making sure that the fabric does not stick together anywhere. Smooth the fabric with your hands, especially carefully in wrinkled areas. Wet the product generously with clean water from a spray bottle. After a few days, the organza tulle should even out.
If you have a steam generator, use it. Hang the product on the ledge and steam. This method is considered the most convenient and fastest among housewives.

Properly ironed tulle curtains on the windows will not only please the hostess, but will also create a light and pleasant atmosphere in the house!

Before hanging the tulle on the cornice, you will have to iron it in any case. There are several ironing methods - the choice depends on the material from which the curtain is made. Regardless of which method the housewife chooses, she should know that tulle is ironed only after washing.

Ironing

First of all, you need to check the condition of the soleplate of the iron. If there are traces of burnt fabric on it, it must be cleaned. Otherwise, such an iron will leave on the canvas dark spots, ruining her forever.

Then you need to choose the proper temperature - it should not exceed 120 degrees. Steam mode is suitable for most types of tulle curtains. Therefore, it is recommended to “fill” the iron with water in advance. If such a function is not provided in the iron, the ironing board is covered with a damp cloth and the fabric is ironed on it. It is not advisable to spray water on the tulle using a spray bottle, as yellow spots may remain on it after ironing.

The best option would be to process tulle that has not yet dried completely. Slightly damp fabric is smoothed out without much effort. You don't have to use the steam mode.

If the curtain is too long and wide, you can quickly iron it by hanging it on the curtain rod. To do this, the ironing board is moved as close as possible to the window, the lower part of the curtain is ironed to the middle. Then the curtain is hung at the other end and ironed in the same way.

We offer housewives some tips that will help them achieve the best results.

Tulle fabric is ironed vertically - from top to bottom.
When ironing seams, it is advisable to always use damp gauze, regardless of whether the curtain itself is wet or dry.
For convenience, the canvas can be folded several times, but in this case you should not touch the folds with a hot sole.
You only need to iron on the reverse side.
It is recommended to start ironing by checking: with the edge of the heated sole, touch the corner of the fabric. This will prevent you from burning the curtain if the temperature is too high.
Silk curtains should be ironed through a sheet of paper.
Tulle made from dense synthetic fabrics can be spread out for a while on a large horizontal surface after ironing. This will allow the effect to “fix” and the canvas will not wrinkle for a long time.

How to iron tulle without an iron?

Owners of a device called “sender” can answer this question. This unit will do an excellent job even with the most wrinkled curtains that the iron did not pick up. The convenience of the steamer is that it can be used on already hanging tulle. The main thing is to thoroughly clean the brush before processing.

As for linen and cotton tulle, you can bring them back to normal without an iron and without a steamer. To do this, just hang them on the cornice until completely dry. These heavy fabrics easily straighten under their own weight. However, for other materials (organza, silk, nylon) this ironing method is not suitable. They are too light to stand upright.

How to smooth tulle made from different materials?

Despite the existence general principles correct ironing, each material “dictates” its own requirements for proper care. In no case should they be ignored, as there is a risk of simply losing the tulle. But, as you know, it is the main decoration of the room.

Organza

This fabric is characterized by excessive “capriciousness” and therefore requires especially delicate handling. In particular, tulle made from such material is ironed only after complete drying. A hot iron can easily damage the fine fibers of silk and polyester, so to avoid damaging them, the housewife must act correctly and be careful.

Ironing is allowed only after drying.
It is not recommended to use the “steam boost” mode, as it leads to the appearance of “waves” that are very difficult to smooth out.
To prevent the sole of the iron from sticking to the fabric, after washing it is recommended to rinse it in a weak salt solution (20 g of salt per 5 liters of water).

Capron

This is a light, airy, transparent and relatively inexpensive material, with aesthetic qualities in no way inferior to expensive organza. There are also features in ironing nylon tulle that allow you to preserve their appearance for a long time.

The fabric should be ironed through damp gauze or use a special attachment for the soleplate of the iron.
Nylon is ironed immediately after washing, since in an overdried state this fabric is difficult to process.
The temperature of the sole should not exceed 100 degrees, otherwise there is a risk of leaving the notorious non-disappearing “waves” on the curtain.
It is not recommended to use a spray bottle, as drops of water after ironing will leave yellow stains on the tulle.

Linen and cotton

Unlike the previous two, these fabrics are of natural origin. Ironing linen or cotton tulle is not easy. Therefore, as mentioned above, some housewives hang them up without an iron. However, if you still plan to iron the curtain, you need to wash it in the delicate wash mode with a weak spin cycle or without it at all.

Linen and cotton are ironed at a temperature of 120 degrees.
To make work easier, the housewife can use wet gauze as an intermediate layer between the linen and the iron.
Ironing is done only from the wrong side.

In addition to the materials that we talked about, fabrics such as crystallon, muslin, etc. are used to make curtains. They are most often synthetic in origin, and their ironing follows the same rules as for nylon and organza.