Knitting a sweater for a boy pattern fig. Knit a warm sweater for a boy: diagrams, pattern, description. Are measurements needed?

How adorable children look in knitted blouses. And there are so many different models of sweaters for boys. The eyes run wide from the bright models and all kinds of schemes. Where to begin? Read more about the most important details that a craftsman should consider when creating a sweater for a boy.

Any product requires a pattern and diagram. These are the very first steps that the craftswoman must take. Next, based on the model, yarn is selected. After the knitting needles, they should be the same size (this way the product will be denser and will retain its original shape for a long time).

Important!

In many master classes that are available on the Internet, yarn is usually indicated and how much it will be needed for a certain size.

Pay close attention to the model itself and the pattern of the fabric for the sweater. If these are newfangled aranas, then they will require additional knitting needles (several). Special markers will help you not to get lost or break the pattern. About the intricacies of choosing tools and yarn.

Choosing good threads

Knowledge will help you avoid making mistakes in choosing yarn. The first thing to pay attention to is the composition. A knitter should know what each type of yarn is intended for. Briefly about the most popular types and where they are best used:

Wool yarn (natural)- perfect for creating scarves, hats, socks, sweaters. It includes the following subspecies:

• angora;
• mohair;
• cashmere;
• Shetland yarn;
• merino yarn;
• 100% wool;
• alpaca.

Acrylic- this is already “artificial wool”. It is usually added to wool yarn. To create warm clothes, you need to choose yarn with an acrylic composition of 10–20 percent;

Cotton yarn- This is also a natural yarn and is more often used to make summer things. But it is intended mainly for crocheting;

Linen yarn - a type of natural yarn for creating summer clothes, a stiffer yarn;

Silk yarn - has a decent appearance, some shimmer. In hot weather it retains a good feeling of coolness. Suitable for creating items that are not warm;

Viscose- popular as “artificial silk”. Suitable for creating warm clothes, but it will be uncomfortable when warm;

Bamboo- an excellent solution for creating children's things. The yarn has antibacterial properties, is very soft and hypoallergenic.

The second point that is worth considering is the thickness of the yarn; usually this information is also available in master classes.

And the third thing is the threads themselves. They must be uniform, without breaks or various defects.

Selecting tools

Experienced craftsmen have already learned to determine by eye which knitting needles are suitable for what thickness of yarn. For beginners, the tips on the yarn package will help. If there are none, then you can ask the seller for advice. You can learn to determine the right size yourself.

Important!

Basic rule: “The knitting needle should be twice as thick as the thread.” To choose the size, you need to fold the sample into two threads and twist it - this will be the thickness of one knitting needle.

Additional knitting needles for making braids may also be different. There are also very comfortable short ones with a folded middle. These will not interfere with your work and will not fall off while the master is performing the braid element.

There are different markers, but it is more convenient to buy bright and contrasting yarn options. They will help when counting loops. For example, they are convenient for the same braids; there should always be an equal number of loops between the intersections and the marker helps with this.

Regular needles are not suitable for joining knitted items. Thicker needles will be needed.

Are measurements needed?

Knitted items, unlike others, do not require such scrupulousness in meticulous measurement. You can use two ways to create a gizmo:

• measure as you knit, simply applying the product to your model;
• Take a few measurements in advance and knit according to them.

There is also a table of standard sizes for boys.

A child does not always grow according to GOST standards, and therefore it is better to measure each indicator.

How to take measurements for a sweater

For the sweater you will need to take only 6 measurements:

1. What sleeve length is needed - this is the measurement from the point of the shoulder to the wrist (be sure to pass the tape through the elbow).
2. Neck circumference - this indicator will help you knit the right size collar for a sweater. To measure, apply the tape and do not tighten it; it should fit loosely around the neck.
3. Back length. It does not always have to match the length of the product; more often the sweater is knitted with a small margin so that the back is always well covered. Plus an extra elastic band. The measurement itself goes from the lower cervical vertebra to the waist line.
4. Chest circumference - at chest level.
5. Waist circumference - if you need a strictly fitted product.
6. The circumference of the hips is important for creating elastic so that the product does not pull and is not too loose.

Now let's start looking at popular knitting patterns.

Knitting a sweater for a boy: patterns with descriptions

Without a doubt, the most popular knitting patterns for a boy's sweater are those that everyone loves arans. Model diagrams are no less popular raglan, and even simple pattern designs can create a fashionable product. Add a thick but soft thread to regular garter stitch and you can knit a creative pattern. Large voluminous buttons can serve as an excellent decoration element.

Children's sweater with collar and braid pattern

Sweater for a boy with a height of 110. An abundance of braids and a combination of pearl patterns are very popular solutions for 2018.

Required:

• Nako Bambino yarn 11.5 skeins;
• knitting needles number 3.5 and 4.5;
• stitching needle.

Several schemes were used in the work.

Pattern number 1 is braids on the side of the front and back, and this is also a pattern of braids on the sleeves.

Pattern 2 is a regular pearl pattern; it dilutes the sleeves and the side parts of the front and back.

Pattern 4 is the elastic band for the cuffs.

Between the patterns there is a purl stitch.

First stage: front and back

You will need to cast on 74 stitches on needles for this size. Knit with an elastic band 2*2. The height of the elastic should be 5 cm. In the last row you need to evenly add several loops so that you get 82 loops on the knitting needles. Then we immediately go to a combination of schemes, as in the photo. This is in the center - pattern number 2. On the sides there are two patterns 1 and 3. The remaining side loops are occupied by a pearl pattern. Knit according to the proposed patterns up to a height of 37 cm. Next, in the next row, bind off 4 loops for the sleeves.

Important!

For children's products, a square armhole is often used.

At a height of 43 cm, the formation of the neck begins. There is no need to bind off the stitches; you can simply transfer them to an additional needle. This will make it easier to make a neat gate later.

Separately knit the right and left shoulders, following the pattern of the fabric.

Make the second part in the same way; it is no different from the first.

Sew the shoulder seams and use circular needles to knit the neckline. This helps avoid unnecessary seam.

Second stage: sleeves

There is no need to sew on these sleeves. You just need to make a set along the edge of the armhole to the right and left of the canvas.

There are three pigtails in the center of each sleeve. For the left sleeve, three braids from pattern number 3 and pattern number 1 for the right. There is a pearl pattern on the sides of the braids. In total, you need to cast on 62 loops for the sleeve. Make decreases for the sleeve according to the scheme: after 5 cm, decrease one loop of each edge. After a length of 31 cm, move on to the cuffs. This is again a 2*2 elastic band. So knit 5 cm and close the loops.

Third stage: assembly

We hide the extra threads and simply sew the sides of the sleeves and the front and back. A sweater with original braids is ready.

Pullover with buttons for boys

A simple sweater made of canvas with an English rib pattern. Cuffs with elastic band 1*1, bottom and neck with elastic band 1*1. This is the same sweater. What boy didn’t want to try one of these on himself in the 2000s.

The sweater in which the main character of the film “Brother” appeared on the screen. A sweater like Danila’s is knitted using simple patterns.

Simple cut and large thread.

Back And before tied without armholes. Only a small neckline. For the front and back, use the basic English rib pattern. The cuffs and bottom of the product are 10 cm of 1*1 elastic.

Collar- this is also a 1*1 elastic band. Make holes (capes) for buttons along the edge of the collar.

Sleeves also made with English elastic. Such a simple model is now back in fashion. Therefore, all those who did not have time to try on such a sweater in 2000 can freely do so now.

Knitted striped sweater for a boy

Elegant wide stripes look noble on a boy's sweater. For the attention of needlewomen, another trash item is a model with comfortable buttons on the shoulders. It will be convenient for a child to put on and take off this model.

On a note!

You can choose stripes of other colors - one stripe takes up 10 rows.

The pattern for this piece is a simple stockinette stitch. For sleeves cuff made of rubber bands 2*2. The bottom of the back and front is also made with 2*2-10 cm elastic.

For back and front you need to cast on 80 loops for a height of 110 cm. No additions are needed, you just need to cast on 4 loops for the armhole. Make a slight bevel for the neckline. In this model, the back and front are knitted the same way. After creating the front and back, you need to draw a line where the buttons will be next. You need to pick up a loop along the top edge and knit 2–3 cm with an elastic band. Don’t forget to make two holes on the right and left shoulders.

Then you need sew buttons symmetrical to the holes on the opposite side.

Fasten the buttons and sew on the sleeves. Sew the side seams and try on the sweater.

Sweater with jacquard knitting pattern

A distinctive feature of such a contrasting sweater is the variety of tiny patterns. Contrasting threads make them even more expressive. Only the painstaking work is worth it, because such a beautiful product can be made with your own hands.

For size 134/140 you need 200 g of sand-colored yarn, 50 g of other colors.

Sequence of patterns A-D. Knit the model in stockinette stitch using the jacquard technique.

For size 134/140 you need to cast on 109 stitches. Knit an elastic band for the back and front 10 rows and go to the canvas, adding 12 loops for each canvas. Knit 31 cm (for the back 33) and bind off the loops for the sleeve armhole with 8 loops. Next knit another 14 cm.

How to bind off front/back neck loops:

1. close the central 31st points;
2. twice two loops in the next rows;
3. one time at a time.

Sleeves: Cast on 47 stitches and 10 rows of rib using knitting needles. Add 8 stitches on the last row. Switch to the main pattern and stockinette stitch. Next, add one loop in every 6th row. After 42 cm, close the loops.

Assembly: make shoulder seams and cast on 108 loops under the binding. Make a neat collar with an elastic band (this is 11 rows). Sew in the sleeves. Make side seams for the sleeves and the garment. That's all, the efforts are completed with an amazing result.

There is no need to be afraid of complex elements. As soon as the most complex patterns are mastered, the interesting work of any needlewoman begins. So don't just stick to creating simple options. In fact, it turns out that a model that pleases our eyes is not so difficult to create.

For a boy's sweater, bulky buttons are often used - this emphasizes the masculine character of the sweater.

Dimensions: 98/104 (110/116) 122/128. If there is only one number, it applies to all sizes.

You will need: yarn (98% wool, 2% polyester; 90 m/100 g) - 400 (400) 500 g pistachio and 100 g neon yellow; knitting needles and short circular needles No. 9.

Garter stitch: front and back rows - front loops. In circular rows, alternately knit 1 circular row - purl loops, 1 circular row - knit stitches.

Facial surface: front rows - front loops, purl rows - purl loops.

Purl stitch: front rows - purl loops, purl rows - front loops.

Striped Pattern:* 5 rows in stockinette stitch, 1 purl row - knit stitches, from * constantly repeat.

Knitting density: 11.5 p. x 19 r. = 10 x 10 cm, knitted with a striped pattern; 11.5 p. x 22 r. = 10 x 10 cm, knitted in garter stitch; 11.5 p. x 20 r. = 10 x 10 cm, knitted with a combination of patterns.

Back: cast on 38 (42) 47 stitches on the knitting needles with pistachio thread and knit for the placket in garter stitch, starting with purl 1 row, 7 r. pistachio thread and 4 r. neon yellow thread. Then continue knitting with pistachio thread 24 (24) 30 p., observing the following sequence of patterns: chrome, 9 (11) 13 p. striped pattern, 1 p. purl stitch, 8 p. garter stitch, 1 p. purl stitch, 17 (19) 22 p. striped pattern, chrome. Then knit 12 rows, observing the following sequence of patterns: chrome, 9 (11) 13 stitches in a striped pattern, 1 stitch in purl stitch, 16 stitches in garter stitch, 1 stitch in purl stitch, 9 (11) 14 stitches. striped pattern, chrome. Next, follow the following sequence: chrome, 17 (19) 21 p. with a striped pattern, 1 p. satin stitch, 8 p. garter stitch, 1 p. purl. satin stitch, 9 (11) 14 p. striped pattern, edge stitch. At the same time after 18 cm = 36 r. (20 cm = 40 rub.) 22 cm = 44 rub. close from the bar for armholes on both sides 4 p. = 30 (34) 39 p. Continue knitting straight and after 31 cm = 62 r. (34 cm = 68 rub.) 37 cm = 74 rub. from the placket, close the middle 12 (14) 17 stitches for the neckline and finish both sides separately. To round the cutout along the inner edge, close in the 2nd row. 1 x 1 p. After 33 cm = in 66 r. (36 cm = in 72nd r.) 39 cm = in 78th r. Purl the remaining 8 (9) 10 stitches of the shoulder and close at the same time.

Before: knit symmetrically to the back, but with a deeper neckline. To do this, after 28 cm = 56 rubles. (31 cm = 62 rub.) 34 cm = 68 rub. close off the middle 6 (8) 11 stitches from the bar and finish both sides separately. To round the cutout along the inner edge, close in every 2nd r. 1 x 2 and 2 x 1 p.

Sleeves: cast on the knitting needles with pistachio thread for each sleeve for 26 (28) 29 loops and for the placket, starting from the 1st purl row, knit in garter stitch 7 r. pistachio thread and 4 r. neon yellow thread. Then continue knitting with pistachio thread in a striped pattern, while for the bevels of the sleeves from the placket, add 4 x in every 8th row according to the pattern on both sides. (4 x in every 10th r.), 5 x alternately in every 8th and 10th r. 1 p. = 34 (36) 39 p. After 24 cm = 46 r. (27 cm = 52 rub.) 30 cm = 58 rub. knit another 1.5 cm from the bar = 4 r. using neon yellow garter stitch thread, then bind off all stitches. Assembly: sew shoulder seams. Along the edge of the neckline, cast on 40 (42) 46 sts with pistachio thread on circular needles. For the neckline, knit 4 rounds in garter stitch. neon yellow thread and 10 circles. pistachio thread, then loosely bind off all the loops. Sew in the sleeves, then sew the side seams and sleeve seams.

If you have a free minute or two, and your son or grandson has outgrown an old pullover or sweater, it’s time to knit a zip-up sweater for a boy. We offer the most interesting children's knitted sweaters for boys and will be glad if you choose what you need. All models with diagrams and descriptions.

First of all, it will be easier for you to knit if you immediately decide on the sizes, since much depends on the height and other data of the child. Using a centimeter, measure the length of the product, the volume of the hips, the length of the sleeve, starting from the neck to the palm, and write down all the data.

This interesting knitted sweater with a hood for a boy is suitable for young people 7-8 and 10 years old. The front of the sweater is decorated with intarsia (a cat's face), and the hood is a striped cat's tail ending in a braid of thread.

We knit a cat according to the pattern below. The easiest way to knit such patterns is from separate balls, each section has its own ball. To avoid holes in the pattern, cross the thread on the wrong side, but do not tighten it too much. We always make sure that the drawing does not decrease as we work.

To work you will need:

1. 100% cotton yarn (10 (7-8 years old) and 12 skeins (8-10 years old) - 50 g/50 m). light gray color.
2. Wool yarn, black and white - 100 g each.
3. Knitting needles 3 and 3.5 mm thick.
4. Additional 3.5 mm knitting needle.
5. Pins or stitch markers.

We knit in 2 threads. It would be ideal to knit a 10/10 cm “tester” to determine how many stitches you need to cast on, since the description does not indicate the exact name of the threads. Most likely, these are “violet” type threads.

The knitting density is indicated as: 21 p. / 29 r. Corresponds to 10/10 cm. Designations: knit - knit, purl - p, loop - p. Main knitting - knit stitch.

For 3 mm knitting needles. cast on 94 (102) sts with light gray yarn, knit 1 p/1 rib. Elastic band 3.5 cm - 10 rows. We switch to 3.5 mm knitting needles. Next, knit in stockinette stitch. Knitted 123 (134) rubles. - 42 (46) cm. From the elastic we close the middle 32 sts for the neckline. Find the middle of the row and decrease 16 sts on one side and the other from the center. Next, leave one half of the work for additional work. knitting needle, and on the other half we close from the inside in every second r. 2 times 1 p. Next, close in this r. remaining 28 (32) shoulder stitches. Knit the second half symmetrically from the auxiliary needle.

Make the elastic band the same as we did on the back. Next, we begin to make a drawing of a cat: on 3.5 mm knitting needles. Next, we stop at the front river. and make a pattern: 18 (22) sts in light gray, 58 sts according to the pattern, 18 (22) sts in light gray. For convenience, find the middle of the picture and mark it with a pin (arrow in the picture). Next, we knit according to the pattern. When the pattern is completed, use stockinette stitch in light gray (primary) color.

We knit 110(120) rows 37(41) cm. From the elastic we close the middle 24 sts to decorate the neck of the product. First we will make the left side of the shelf. To create a rounded neckline, you need to close it on the inside at the beginning of each r. 1 p. So we close until (20 r.) until 30 (34) p. remain on the knitting needles, this is the shoulder. Close these steps. Make the right part symmetrically with the left.

Sleeves

We cast on the knitting needles 3 mm. light gray thread 44 p. and knit 10 r. elastic band 1/1. Next comes the stockinette stitch. In the first r. add 6 p., you get 50 p., then in every 5th p. add 1 stitch on both sides. We knit this way until there are 78 (92) sts on the knitting needles. It turns out 27 (32) cm. From the elastic we close all the sts of the shoulder. The second sleeve is similar to the first.

Hood

We sew the shoulders together with a large needle and gray thread. Next, find the middle of the back and mark it with a pin. for 2 knitting needles 3.5 mm. Along the edge of the neckline we cast on 116 stitches with a light gray thread, (58 stitches on each knitting needle) first we knit on the 1st knitting needle, then on the 2nd and at the end of the work we will sew these 2 halves. In the middle of the front, on the 1st needle, we make a bar with a 1/1 rib on the first 5 loops. We knit the rest of the hood using stockinette stitch. From the back we will add loops and knit them with black and white yarn. If you want to make a regular hood, you can simply knit without adding anything until the height of the 56th row and close all stitches. If you want a striped hood, add white and black stripes to the left. Add 1 point in each row. You will get 4 rubles. black yarn, 4 r. white, several stripes. We do this:

• 1st row: 58 p. persons. gray yarn, add 1 stitch of black yarn.
• 2nd row: 2 p. Black Ave., 58 p. gray ave.
• 3rd row: 58 sts. gray ave., 3 p. persons. black ave.,
• And so on.

They tied it up to 56 rubles. and close the st. On the 2nd knitting needle, do the same as on the 1st. Don't forget 5 stitches of elastic at the beginning. Next, we make, if desired, a braid of 20 threads of 2 or 3 colors, tied at the bottom with black thread.

Assembly

Sew our hood inside out, not forgetting to insert a pigtail. Next, unfold the sleeves and sew them to the front and back. Sew the inside seams of the sleeves, and then the side seams of the product.

A sweater for a boy made of blue yarn with knitting needles is an excellent option for cool weather. Convenient button closure makes it convenient and versatile. We tried to explain everything in detail, so that the master class is understandable even for beginners. Cardigan sizes for boys: a) 4 years old, b) 5-6 years old, c) 8-9 years old, d) 10 years old, e) 12-13-14 years old.

Abbreviations: row - p., knit - knit., purl - purl., loop - pet., together - vm., edge - hem.

To work you will need:

1. Alpaca cashmere yarn (48% alpaca, 52% acrylic), 100 g. - 133 m. - 8-9-11-14-16 skeins.
2. Knitting needles 3 mm thick. and 3.5 mm.
3. Buttons 5 pieces 20 mm. diameter, buttons 10 mm.
4. Needle with a large eye.

The main pattern is stockinette stitch, the bottom of the sleeves and the bottom of the jacket is 1k/1p rib, the pattern on the front and collar is patent ribbing.

Patent gum, sample.

Scheme for patent gum, option 1.

Patent elastic can have several options, but we chose option 1, it is knitted like this:

We dial an odd number of p.

1st r.: hem., *1 p. and yarn over - remove as purl., knit 1*, repeat from * to *, finish: 1 p. and yarn over - remove, hem.

2nd r.(wr.): edge, * 1 p. and yarn over - knit in. knits., 1 p. and yo* - remove as purl, repeat from * to *, finish: 1 p. and yo - knit in. faces, edges

3rd r.(face r.): edge, * 1 p. and yarn over - remove as purl, 1 p. and yarn over - knit in. persons*., repeat from * to*, finish: 1 p. and yarn over - remove as purl, hem.
Repeat rows 2 and 3.

In principle, the collar can be knitted with a simple elastic band, k1/p1. or you can use a patent, whichever you prefer.

Samples:
10/10 cm faces. satin stitch - 23 p./30 r.,
10/10 cm with patent elastic - 22 p./50 r.

We cast on needles with a thickness of 3 mm. a) 79 p., b) 85 p., c) 91 p., d) 97 p., e) 111 p., knit with 1/1 elastic band. At the beginning and end of the first river. - 1 purl. We knit 6 rows like this (2 cm).

Next, we switch to 3.5 mm knitting needles and knit in satin stitch to a height of 24-26-28-31-34 cm, which corresponds to 120-130-140-154-170 r. from the elastic band, we make armholes, on both sides you need to close 10 sts: on one side - close 5 sts, 1 in each r., and on the other - 5 sts, 1 st in each r. Knit to the starting point of the shoulder only 14-16-17-18-21 cm, including the armhole. Remaining on knitting needles: 69-75-81-87-101 sts.

We divide the back in half and mark this place with a pin. At a distance from the elastic: 38-42-45-49-55 cm. (162, 178, 192, 212, 234 rubles) we make a neckline, while closing the st in the center of the back: 13-15-17-17-21 p., then remove one half (6,7,8,8,10 p.) onto an additional knitting needle, close on the working knitting needle 2 more times, 5 p. each. Then return to the additional knitting needle. knitting needle and knit symmetrically the second half of the neck. Then we decorate the shoulder: at a distance from the elastic 38-42-45-49-55 cm. (166-182-196-216-238 rubles) close on the side. armholes in each second row:

1. 2 times 9 p.,
2. 2 r. 10 p. each,
3. 2 r. by 11p.,
4. 2 r. 12 p. each,
5. 2 r. 15 p. each

Right shelf

We cast on needles with a thickness of 3 mm. 37-41-43-47-53 p., perform an elastic band 1/1 6 r. (2 cm). Next, we switch to 3.5 mm knitting needles and perform patent elastic:

1. 15 rows,
2. 16 rub.,
3. 18 rub.,
4. 20 rub.,
5. 22 rub.,

Then, at a height of 26-28-31-34-37 cm (130-138-154-170-172 r.), make 1 decrease (beginning of the neckline). To get a beautiful neckline, we must remove evenly: 9-11-11-15-17 stitches along the neckline, do not touch the shoulder yet. Therefore, we remove every 4th r. 1 p. (for all sizes).

Forming a shoulder. At a distance from the elastic band 38-42-45-49-55 cm. (166-182-196-216-238 r.) close on the side. armholes in each second row:

1. 2 times 9 p.,
2. 2 r. 10 p. each,
3. 2 r. by 11p.,
4. 2 r. 12 p. each,
5. 2 r. 15 p. each

We knit the left shelf symmetrically to the right one.

Sleeves

We cast on the knitting needles 3 mm. 48-50-52-54-58 sts and knit 5 cm with a simple 1/1 rib. Next, we continue with satin stitch on needles 3.5 mm thick. Our task is to add 16-22-26-28-38 sts along the sleeves. On the sleeve add: in every 4th r. 1 p. This should be done in the middle of the row. We tie it to a height of 20-25-29-32-38 cm, not counting the elastic band. It will be 62nd-76th-88th-98-114 r. from an elastic band.

It turns out in the end at the starting point of the okat - 64-72-78-82-96 sts.

Then we must design the sleeve cap, to do this we decrease on each side:

1. 3 times three sts, 4 times two sts, 2 times three sts.
2. 2 times four p., 1 r. three p., 3 r. two p., 2 r. three p., 1 r. four p.
3. 2 times 4 p., 2 r. 3 p., 1 r. 2 p., 2 r. 3 p., 2 r. 4 p. (abbreviation verbatim: 1 time - 1 p.)
4. 1 time 5 p., 1 r. 4 p., 2 r. 3 p., 1 r. 4 p., 1 r. 5 p.
5. 1 time 6 p., 1 r. 5 p., 1 r. 4 p., 1 r. 5 p., 1 r. 6 p.

We tied it to a height of 26-31-35-38-44 cm and closed the rest in one r. - 17-18 p. Make the second sleeve symmetrically to the first.

Fastener strip

On knitting needles 3 mm thick. cast on 13 stitches and knit with a simple 1/1 elastic band. All odd r. start and end with two persons. n. We knit a strip with a height of 29-32-35-39-44 cm. Make the second strip similarly to the first.

Shawl collar

For 3.5 mm knitting needles. cast on 93-99-103-107-113 sts and knit with patent elastic. After making 14 r. (3 cm), then close each. sides like this:

1. In each 2nd row: *1 time 1 p. and 2 times 2 p.* repeat from *to* a total of 7 times.
2. In each 2nd row: *1 time 3 p., 2 times 2 p., then in each. 2nd row: *1 time 1 p. and 2 times 2 p.* - repeat from *to* 6 times.
3. In each 4th row: 5 times 2 p and further in each. 2nd 14 times 2 p.
4. In each 2nd r.: 1 time 3 p., 2 times 2 p., then in every 2nd r.: *1 r. 1 p. and 2 times 2 p.* - repeat from * to * 6 times, then, 1 p. 1 p. and 1 p. 2 p.
5. In each 2nd row: 1 time 3 p., 2 times 2 p., each. 2nd r.: *1 time 1 p. and 2 r. 2 p.* repeat from* to* 6 times, then 2 times 2 p.

Knitted to a height of 11-11-12-12-12 and cast off 23-25-27-27-31 sts.

Assembly

Sew first the shoulders and sleeve seams, then the side seams. Sew the sleeves into the armholes. Then we sew the strips to the shelves on one side and the other. Find the middle of the back neckline. We are looking for the middle of the collar. We combine these points and pin them together. We sew the shawl collar to the neck, the ends to the straps. We make 5 buttonholes, spreading the 8th stitch first 1 cm from the bottom and the rest - in places of 2 p. persons iron. We sew the buttons opposite the p. To make the collar cover the throat, you can sew buttons in addition to the buttons. The pattern is suitable for boys of all ages, as well as for three and five years old.

An excellent children's knitted sweater for a boy, decorated with 2 types of braids, with a comfortable hooded collar, will come in handy in cool weather. Knitting a sweater for a boy is very simple; it can be made from wool, wool with acrylic, or yarn with cotton.

Not everyone has the opportunity to buy exactly the yarn that is recommended for this particular blouse - choose threads of the same thickness. If the thread is thin, knit in 2 threads. The main thing is that your “sample” matches the knitting density of this sweater.

Knitting density is:
10/10 cm with 5 mm knitting needles. stockinette stitch - 18 stitches/25 rows.

The description and pattern are given for a boy of 4, 2, 6, 8 years old.

To work you will need:

1. New York yarn (50% wool, 25% alpaca, 20% polyamide), 50 g./110 m. 250-200-300-350 g.
2. Knitting needles 4.5 and 5 mm thick.
3. Thick needle for sewing.
4. Additional knitting needle for the pattern.

The patterns used in this product are often used for jumpers:
Pearl Pattern:

1st row: *K1, P1* - repeat from* to *to the end of the row.
2nd r.: *P1, k1* - repeat from * to * to * until the end of the r. That is, above persons. - purl, and vice versa.

Double elastic band:

1st row: k2, p2 - repeat until the end.
2nd row: how the knitting looks - faces. p. we knit with knits, purl. - purl.

Braid type number 2.

Braid number 2 is performed according to pattern 2. All even rows are knitted the way the knitting looks (that is, over the knit stitch - purl, over the knit stitch - knit). All other rows should be read from right to left.

Cast on 4.5 mm needles. 62-56-68-74 sts. First knit 14 rows with double rib. Next, change the knitting needles to 5 mm. and knit 8-5-11-14 p. with a pearl pattern, k1, 6 p. according to “braid pattern number 1”, k1., 7 p. with pearl pattern, k1., 14 p. “braid pattern number 2” ”, k1, 7 p. with pearl, k1, 6 p. according to “braid pattern number 1”, k1, 8-5-11-14 p. with pearl knot.

We continue until 27-23-31-35 cm from the beginning of the back. To decorate the armhole, close 3 stitches on each side, then 2 stitches, and 1 stitch. Then, without decreasing. Knit up to 43-38-48-53 cm from the beginning of the back and close off the remaining sts.

Before

We take 4.5 mm knitting needles. and dial 62-56-68-74 p. Knit 14 r. double elastic band. Change the knitting needles to 5 mm. and knit like this: 8-5-11-14 p. with a pearl knot, k1, 6 p. according to “braid pattern number 1”, k1, 7 p. with a pearl knot, k1, 14 p. according to “braid pattern number 2”, k1, 7 p. with a pearl knot, k1, 6 p. according to “braid pattern number 1”, k1, 8-5-11-14 p. with a pearl knot. We knit with this pattern to a height of 27-23-31-35 cm from the beginning of the front. Then for the armhole we close on both sides 3 points, 2 points, 1 point each. After we have reached 40-36-44-48 cm from the beginning of the front, we close 12 points in the center of the front under the neckline. Next, on both sides of the neckline we close 3 sts, 2 sts, 1 st. After we knit to 43-38-48-53 cm, we close all the remaining sts.

Sleeves

We cast on needles with a thickness of 4.5 mm. 28-24-32-36 p. We perform 14 p. double elastic band. Next, change the knitting needles to 5 mm. and do this: 10-8-12-14 sts with a pearl pattern, k1, 6 sts according to “braid pattern number 1”, k1, 10-8-12-14 sts with a pearl pattern. knot Then we knit with this pattern, not forgetting to add eight times on both edges in every sixth row.

After 28-25-31-34 cm are knitted from the beginning of the sleeve, close 3 stitches on both sides of the sleeve, and then close 1 stitch on both sides in every 2nd r. 9 times. This is the cuff of the sleeve. When the length reaches 38.5-34-42-47 cm, close all sections. We knit the second sleeve in the same way.

Hood

We take 5 mm knitting needles. and cast on 64-58-70-76 sts and perform the following pattern: 3 sts with a double elastic band, 7-4-10-13 sts with pearls. pattern, knit 1, 6 p. according to “braid pattern number 1”, knit 1, 28 p. with pearl knot, knit 1, 6 p. according to “braid pattern number 1”, knit 1, 7-4 -10-13 p. pearl pattern, 3 p. with double elastic band. So we continue to knit 3 cm (8 r.) from the beginning of the hood. Next, on both sides of the 2 central sts, add 1 st in every 2nd r. 3 times.

Next, we reach 20-18-22-24 cm from the beginning of the hood and begin to decrease 1 st on 2 sides from the 2 central sts in every 2nd r. 4 times. Fold the hood in the middle and distribute the sections of the hood evenly onto 2 knitting needles. Close the stitches of the 2 halves of the hood, purlwise, using the 3rd knitting needle.

Assembly

First we sew the shoulder seams. Sew the hood along the entire neckline. Sew the side. seams of sleeves and back with a shelf. We make 2 pom-poms and sew them in the place indicated in the diagram.

Knitted sweater with a zipper for a boy 6-8 years old. Decorated with jacquard with horses. Description and knitting pattern are included.

Knitted sweater for a boy 2-3 years old. Knitted from multi-color yarn (wool with acrylic) with 4 mm knitting needles. For a sweater for a 3-year-old boy, a zipper with a length of 48 cm is suitable.

A gray jacket for boys 5, 6, 8-10, 12, 14-16 years old is decorated with simple braids and yellow trim. Suitable for both toddlers and teenagers. To enlarge the picture, click on the arrow.

It’s very easy to knit such a sweater for a child or teenager; descriptions and diagrams are included.

A wonderful jacket for a 1 year old boy. The pattern is also given for ages 3, 6 months, one and two years. The bear's face is embroidered with straight stitches.

You want to knit a jumper for a boy, but you are faced with the difficult task of choosing the right option. After all, the knitting possibilities are endless, and the choice is very large. Decide on a knitting pattern and select the appropriate model, and we will help you create great clothes for your child.

Schemes and patterns

Before you start knitting a jumper for a boy, you should choose the right pattern and patterns and, of course, gain inspiration. Your desire will also be important.

To start knitting, patterns and patterns are easy to choose. Don't worry if you're new to this. The article will tell you how to knit a jumper and which pattern is best to choose. At first, limit yourself to a simple pattern and choose a pattern that is close in spirit to your child.

When you get creative with knitting, patterns become a secret weapon for adding color and texture to your decor. They will help make it original and beautiful.

Knitted jumper: description

We will knit a simple jumper. For a product for a height of 86 cm, you will need 200 g of yarn (in our case, this is 2 balls of 100 g each). Yarn composition: 49% wool and 51% acrylic. We use needles No. 4 for the main fabric and No. 3 for the elastic.

Before you start knitting (a jumper for a boy), you need to correctly determine the number of loops, so cast on 20 loops on knitting needles No. 4 and knit the sample this way:

• 1st loop - edge loop;
• then 6 knit stitches;
• 2 purl;
• for a braid - 6 knit loops, 4 purl loops and 1 edge loop.

You need to knit the pattern for 26-30 rows. Then wash it and see if it shrinks or stretches. We measure the sample, in our case it is 9 cm.

A child with a height of 86 cm has a chest circumference of 55 centimeters. Thus, we calculate: we multiply 20 loops by 55 cm (the circumference of the child’s chest) and divide everything by 9 cm (the length of the sample) and we get 122 (the required number of loops for knitting).

If your numbers do not match our example, then substitute yours to get the jumper size you need.

Since we have a product with a braid, and, as you know, braids tighten the product, the number of loops in the front should be greater than on the back. We divide the loops this way:

• back - number of loops is 58;
• before - 64 loops.

Stages of knitting a jumper

To make the edge of the elastic elastic, we will cast on loops in this way:

1. Measure the required length of thread and place it on your thumb. We put the thread from the ball over the index finger, and pinch the thread at the bottom of the upholstery.
2. You only need one knitting needle to cast on the stitches. This type is called an elastic band with an elastic edge or an Italian set of loops.
3. We insert the knitting needle into the loop near the thumb, hold the thread with your finger, use the knitting needle to take it from the index finger and pull it through the loop.
4. Lower the thread and tighten the loop. The first loop is ready.
5. We place the knitting needle under the thread and grab it from the index finger. This loop is similar to the front loop. Next, we do the same action in the opposite direction, thereby obtaining the wrong side.
6. We cast on the purl and front loops in turn, the penultimate loop of the product should be a purl, and we do the last one in the same way as the first, tying a knot at the end.

The front part of the jumper has 64 loops, we cast on 56 stitches, in other words, 8 loops less than required.

Let's start knitting the first row. To do this, remove the outermost loop, knit the second loop, and also remove the purl loop, passing it over the thread. Next is the front loop again, we knit it again. In this way, we remove all the purl loops and knit the front loops to the end of the product. We always knit the last loop with a purl stitch, this is necessary to form a pigtail on the side of the product.

We knit the second row in the same way as the first.

From the third to the twelfth row we knit, alternating 1 purl and 1 knit. There should be 10 such rows.

We remind you that the elastic band that decorates the jumper for a boy is knitted using knitting needles No. 3. And we only purl the outer loops.

We make the pattern using knitting needles No. 4. In the first row, you need to add 8 loops, which we left before we started knitting the elastic band.

In our case, the drawing consists of three types of patterns. If you have more loops than in the proposed option, then you need to add additional ones either in the middle of the pattern or along the edges. The drawing itself consists of 16 facial ones.

We knit 14 loops from the edge, alternating through one and adding 2 additional ones.

Jumper base

Let's start knitting the base:

• The edge loop is removed.
• Add 1 loop.
• Next is the front.
• Purl.
• Facial.
• Purl.
• Add 1 knit stitch.
• Purl.
• Facial.
• Purl.
• Facial.
• Purl.
• Facial.
• Add 1 purl stitch.
• Purl.
• Purl.

Let's move on to the drawing, continuing knitting (jumper for a boy):

• 5 knit stitches for the braid pattern;
• add a sixth knit stitch;
• Purl 2.

Central drawing:

• 4 facial;
• Add 1 knit stitch;
• 6 facial;
• Add 1 front one;
• 4 facial.

• 2 purl;
• Add 1 front one;
• 5 facial;
• purl;
• Add 1 purl;
• facial;
• purl;
• facial;
• purl;
• facial;
• Add 1 purl;
• facial;
• The last loop is necessarily a purl stitch.

If everything is done correctly, you will get 64 loops.

We knit the wrong row using knitting needles according to the pattern of a jumper for boys. The patterns for the side loops will be used in a checkerboard style. In other words, we knit purl stitches with knit stitches, and knit stitches with purl stitches. So we knit 4 rows.

Creating a pigtail pattern on a jumper for boys with knitting needles

The patterns of the 5th row of the main knitting also have a checkerboard pattern. We need to swap the first three loops of the braid with the three subsequent ones; to do this, we need to remove all 6 loops on the right knitting needle and first put on the first three removed loops on the left knitting needle, and then the next three. We knit them with facial loops - this is how you get the first braid. If you wish, you can increase the height of the rows by adding 2 rows at a time, but do not overdo it, otherwise the pattern will lose its appearance.

We knit the next six loops of the pattern in the same way as the first braid. And we repeat, increasing the knitting by 4 rows in our case. If you had more rows in the first turn of the braid, then knit the same number. A total of 6 such turns are needed in 4 rows.

And after that we begin to reduce the front half by 3 loops in the first row. In the second row - two loops, and the third row - 1 loop. We continue knitting, increasing the height of the braids by three turns.

Determine where you will have the neckline and bind off the middle stitches. Knit the required height of the product (in our case, 6 rows were enough).

Boy's jumper back

To knit the back of a boy's jumper with knitting needles, you need to cast on 54 stitches and knit an elastic band in the same way as the front.

In the main pattern, we add 2 loops symmetrically on both the right and left. The pattern is knitted in a checkerboard pattern, and the loops are reduced in the same way as the front half of the product.

Knitting a sleeve

To completely knit a jumper for a boy with knitting needles, you need to make sleeves. To do this, cast on 40 loops and knit the elastic in the same way as the front and back. To ensure that the sleeves are the same, try to knit both at the same time. The height of the elastic is 8 rows.

Let's move on to lowering the loops. We reduce by 3 loops using the descending method. We decrease the next row in the same way by 2 loops. We repeat the same steps further: 3 loops, 2 loops and close the remaining ones using the same descent method.

The height of the sleeve was 29 cm, width - 13 cm. At the bottom, the width of the sleeve was 7 cm. The inner part was 21 cm.

Assembling parts for a jumper, processing the neck

Sew all the parts together

Using a crochet hook, pick up the loops on the neckline on the right side - 82 loops. We knit the first row with knitting needles. We knit the next two rows. We repeat the same from the wrong side. The number of loops should be the same as in the front; in our version it is 82 loops.

We knit 1 row of the wrong side in the same way as the front side and the next two loops with the front ones. Next, use a knitting needle to knit the loops from the back and front together. We go 4 rows high and close all the loops.

So you have learned how to knit a jumper for a boy!

For boys, knitting is a real pleasure for the craftswoman. Especially if the boy is only two years old and his clothing size is very small. Such products are knitted in one go, it is impossible to get tired of them, and the result is visible within a few hours.

A few words about yarn

When choosing material for knitting children's sweaters, you should understand the purpose of these products. If you need them for one time, for example, for some holiday or photo shoot, acrylic or other artificial yarn is quite suitable.

It is much cheaper than wool, but does not have the characteristics necessary for warm winter clothes. At the same time, a sweater for a boy, knitted with knitting needles, intended for walks in the fresh air, should definitely be warm, breathable, light and, of course, beautiful.

Traditionally, yarn made from alpaca or merino wool is chosen for children. These materials are of high quality and reasonable price. However, for a baby you will need very little yarn (literally 300 grams).

You can also use sheep's wool mixed with acrylic or cotton.

How to use the instructions?

Often, sources offering knitting needles for boys provide specific data on the density of the fabric, as well as the number of loops and rows. This is only relevant for those craftswomen who plan to use exactly the yarn that was used by the author of the model.

In the case where the thickness, composition or twist of the thread is different, all parameters will be different.

Making a sample

To understand how many loops to cast on at the beginning of the work, you need to knit a small fragment from the yarn that was chosen by the craftswoman, and using a specific pattern. The sample is then washed, dried (so that it takes on its actual size) and measured. The data obtained will be used to calculate the product. For example, according to the sample, it turned out that there are 22 loops (width) and 18 rows (height) per 10 cm of fabric. This means that to start knitting the front part, you need to cast on 40x22/10=88 loops. This figure is just an example, because each craftswoman will have her own density indicator.

Knitting front details

Taking into account the obtained number, you need to cast on the knitting needles the required number of loops and knit five centimeters with an elastic band. Here you can use absolutely any pattern: 1x1, 2x2 or even French elastic.

Here, an empty square represents a knit stitch, and a square with a black dot represents a purl stitch. Icons illustrating the crossing give a visual idea of ​​how many loops and in what direction should be moved.

If we take the previously used example (88 stitches) as a base, the sequence of knitting the first row after the elastic band will look like this:

1 14 knit, 58 in pattern, 15 knit.

Instead of knit stitches, you can use almost any simple pattern. The main thing is not to overdo it and not get confused in the drawings and diagrams, otherwise simple work will turn into endless error correction.

Neck

A boy's sweater is knitted exactly without any additions or reductions. To form the neckline, calculate how many loops should remain, add three to five to form a round neckline and multiply this number by two.

For example: 12 cm x 22/10 = 26. This is the number of stitches that will remain on the last row of each shoulder. Let's add five more to them (they will be shortened in the first five rows after closing the neck loops and will allow us to form a bevel of the fabric):

In total, there is (88-31)x2=26 left for the neck. Rollout formation algorithm:

1. Knit 31 stitches according to the pattern.
2. The next 26 loops are loosely closed or transferred to an auxiliary needle (or thick thread). Once the front and back pieces are sewn together, these stitches will become the basis for the collar.
3. Knit 31 stitches according to the pattern.
4. Turn the work and make 29 loops according to the pattern of the ornament.
5. Knit the last two stitches with one. In subsequent rows, cut 4 loops in this way, leaving 26.
6. Knit the fabric to the desired height, then bind off all the loops (or re-slip on an auxiliary knitting needle if the shoulders will be sewn
7. The second shoulder is performed similarly. Here the cuts are made in mirror image (at the beginning of the row). Sometimes the clasp is moved to the shoulder, as in the photo at the beginning of the article. But, as a rule, this is inconvenient. It's easier to make regular sweaters.

A sweater for a boy (2 years old) can be knitted using a simplified pattern, so there is no need to make a neckline on the back part. After the elastic band, the fabric is knitted with the selected pattern and closed when it reaches the desired length.

Sleeves

Depending on the desire of the craftswoman, the details of the sleeves can be decorated with a pattern or knitted with simple satin stitch.

Sleeves with one decorative element in the center, such as a large braid or interlacing of braids, look good and are relatively simple to make. It is better to place the simplest pattern along the edges of the canvas, because it will have to be expanded.

Add stitches evenly after the cuffs are completed. For example, calculations showed that you need to add 17 cm. This will be (17/2) x (22/10) = 19 loops on each side. Since the sleeve height is also 19 cm, every centimeter the fabric should expand by two loops (at the beginning and at the end of the row).

Product assembly

When all the details are ready, the knitted sweater for a boy can be sewn. First, connect the front and back parts, then sew in the sleeves, pick up loops for the neckline (knit it to a height of 2 cm to 15 cm) and loosely close all the loops.

The described algorithm is perfect if you need to make a sweater for an adult man. In this case, the proportions and dimensions of the pattern will be different, but the sequence of work will remain the same.

The pattern can be located in the center of the front part, then along the edges there will be wide areas knitted with stockinette stitch. Or the decorative pattern can be doubled.

Its center is the small braids, which in the original version were a frame for other elements.